X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31pdk.h;h=49d440b9ae3c736223244c179c9577d5c7942449;hb=48680493092b72f084b60757889fae3d7ee62058;hp=cd156d8b617947c31f17d32009a41a81024da173;hpb=9aa3c6a1ee907a042a2f38e6397e1678c8597927;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index cd156d8b61..49d440b9ae 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -61,7 +61,7 @@
  */
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_MXC_GPIO
 
@@ -70,12 +70,16 @@
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -102,7 +106,7 @@
  */
 #undef CONFIG_CMD_IMLS
 
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	3
 
@@ -117,7 +121,6 @@
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE	0xB6000000
 #define CONFIG_SMC911X_32_BIT
@@ -138,7 +141,7 @@
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_END		0x80010000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x81000000