X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31pdk.h;h=49d440b9ae3c736223244c179c9577d5c7942449;hb=48680493092b72f084b60757889fae3d7ee62058;hp=0414cc37a7a94388950b576b9d4ddd47bd20c655;hpb=f9c7affa9b66498190f309edc4643b4698e21a8c;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 0414cc37a7..49d440b9ae 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -30,51 +30,56 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
-#define CONFIG_MX31		1	/* in a mx31 */
+#define CONFIG_ARM1136			/* This is an arm1136 CPU core */
+#define CONFIG_MX31			/* in a mx31 */
 #define CONFIG_MX31_HCLK_FREQ	26000000
 #define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
-/* Bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART		1
-#define CONFIG_SYS_MX31_UART1	1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_MXC_GPIO
 
-#define CONFIG_HARD_SPI		1
-#define CONFIG_MXC_SPI		1
+#define CONFIG_HARD_SPI
+#define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783	1
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -90,6 +95,7 @@
 
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND
@@ -100,6 +106,8 @@
  */
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_BOARD_LATE_INIT
+
 #define CONFIG_BOOTDELAY	3
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -113,16 +121,15 @@
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE	0xB6000000
-#define CONFIG_SMC911X_32_BIT	1
+#define CONFIG_SMC911X_32_BIT
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"uboot> "
+#define CONFIG_SYS_PROMPT	"MX31PDK U-Boot > "
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -134,14 +141,14 @@
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_END		0x80010000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x81000000
 
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -156,14 +163,23 @@
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
+						CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 /* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH	1
+#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_IS_IN_NAND		1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x40000
 #define CONFIG_ENV_OFFSET_REDUND	0x60000
 #define CONFIG_ENV_SIZE			(128 * 1024)