X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31ads.h;h=9ede7645d9e1230d97cdf99caa35c8fe68b39e02;hb=245f6ef3e11828cb46188e396fb1e67f7b07cd03;hp=5286e1f538c20c3effe80258d4c78cf7e4b88cb2;hpb=04a5b03d86673354741ce4243a244dfc51b32821;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 5286e1f538..9ede7645d9 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -28,7 +28,7 @@
 #define CONFIG_ARM1136		1		/* This is an arm1136 CPU core */
 #define CONFIG_MX31		1		/* in a mx31 */
 #define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32	32000
+#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -62,7 +62,8 @@
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
-#define CONFIG_MXC_SPI_IFACE	1	/* Default SPI interface number */
+#define CONFIG_DEFAULT_SPI_BUS	1
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
 
 #define CONFIG_RTC_MC13783	1
 
@@ -79,15 +80,13 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
 
 #define CONFIG_BOOTDELAY	3
 
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.23.168
-#define CONFIG_SERVERIP		192.168.23.2
-#define CONFIG_LOADADDR		(CSD0_BASE + 0x800000)	/* loadaddr env var */
+#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
@@ -141,7 +140,7 @@
 
 #define CFG_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CFG_HZ			32000
+#define CFG_HZ			CONFIG_MX31_CLK32 /* use 32kHz clock as source */
 
 #define CONFIG_CMDLINE_EDITING	1
 
@@ -186,7 +185,7 @@
  * CFI FLASH driver setup
  */
 #define CFG_FLASH_CFI			1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
+#define CONFIG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
 #define CONFIG_FLASH_SPANSION_S29WS_N	1 /* A non-standard buffered write algorithm */
 #define CFG_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION		1 /* Use hardware sector protection */