X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx28evk.h;h=fac26fb2f2310f9e3a0bdfe31fe0b35c6359c4da;hb=59b37122b10b1d5d1d8c2b6833cc1075e7275892;hp=4fd67eb4a07dc3dbfa11d930502a5abc0eceb27a;hpb=a891601ce51edbafa1a2750c96a618e4fcbca1c2;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 4fd67eb4a0..fac26fb2f2 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -16,30 +16,9 @@
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX28EVK
 
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_VIDEO
 
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
@@ -48,7 +27,11 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Environment */
+#ifndef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			(16 * 1024)
+#else
+#define CONFIG_ENV_SIZE			(4 * 1024)
+#endif
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment is in MMC */
@@ -70,7 +53,6 @@
 /* Environemnt is in SPI flash */
 #if defined(CONFIG_CMD_SF) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SIZE			0x1000		/* 4KB */
 #define CONFIG_ENV_OFFSET		0x40000		/* 256K */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SECT_SIZE		0x1000
@@ -82,7 +64,6 @@
 
 /* UBI and NAND partitioning */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_RBTREE
@@ -104,7 +85,6 @@
 /* FEC Ethernet on SoC */
 #ifdef	CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
@@ -117,7 +97,6 @@
 #ifdef	CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
-#define	CONFIG_USB_STORAGE
 #define	CONFIG_USB_HOST_ETHER
 #define	CONFIG_USB_ETHER_ASIX
 #define	CONFIG_USB_ETHER_SMSC95XX
@@ -130,11 +109,9 @@
 
 /* SPI Flash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SF_DEFAULT_BUS		2
 #define CONFIG_SF_DEFAULT_CS		0
 /* this may vary and depends on the installed chip */
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 #endif
@@ -145,7 +122,6 @@
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
@@ -153,7 +129,6 @@
 #endif
 
 /* Boot Linux */
-#define CONFIG_BOOTDELAY	1
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
@@ -198,7 +173,7 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"nand write ${loadaddr} kernel ${filesize}\0" \
 	"update_nand_fdt="		/* Update fdt */ \
 		"mtdparts default; " \
@@ -230,10 +205,10 @@
 		"nand read ${loadaddr} kernel 0x00400000; " \
 		"if test ${boot_fdt} = yes; then " \
 			"nand read ${fdt_addr} fdt 0x00080000; " \
-			"bootm ${loadaddr} - ${fdt_addr}; " \
+			"bootz ${loadaddr} - ${fdt_addr}; " \
 		"else " \
 			"if test ${boot_fdt} = no; then " \
-				"bootm; " \
+				"bootz; " \
 			"else " \
 				"echo \"ERROR: Set boot_fdt to yes or no.\"; " \
 			"fi; " \
@@ -248,7 +223,7 @@
 		"fi ; "	\
 		"fi\0" \
 	"script=boot.scr\0"	\
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console_fsl=ttyAM0\0" \
 	"console_mainline=ttyAMA0\0" \
 	"fdt_file=imx28-evk.dtb\0" \
@@ -264,22 +239,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; "	\
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
 		"root=/dev/nfs " \
@@ -291,19 +266,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi;" \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -311,7 +286,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \