X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fml300.h;h=319923ad6efe9d6444440932c840303de8b1dd05;hb=7c6237b3e2f2ee0098897da39b79aff4642b8946;hp=d93925ee66ce130a19ce1447d4904cb4db6f55ae;hpb=028ab6b598b628326116acd88e0f35aa9f526d12;p=oweals%2Fu-boot.git

diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index d93925ee66..319923ad6e 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -38,7 +38,7 @@
  *     You should have received a copy of the GNU General Public License along
  *     with this program; if not, write to the Free Software Foundation, Inc.,
  *     675 Mass Ave, Cambridge, MA 02139, USA.
-  *
+ *
  */
 
 #ifndef __CONFIG_H
@@ -54,11 +54,29 @@
 
 #define CONFIG_405		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_XILINX_405	1
 #define CONFIG_XILINX_ML300	1	/* ...on a Xilinx ML300 board	*/
 
-#define CFG_ENV_IS_NOWHERE	1	/* environment is in RAM */
+#define CONFIG_SYSTEMACE	1
+#define CONFIG_DOS_PARTITION	1
+#define CFG_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
+#define CFG_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
+
+#define CFG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
+
+/* following are used only if env is in EEPROM */
+#ifdef	CFG_ENV_IS_IN_EEPROM
+#define CFG_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
+#define CONFIG_MISC_INIT_R	1	/* used to call out convert_env() */
+#define CONFIG_ENV_OVERWRITE	1	/* allow users to update ethaddr and serial# */
+#endif
+
+#include "../board/xilinx/ml300/xparameters.h"
+
 #define CFG_NO_FLASH		1	/* no flash */
-#define CFG_ENV_SIZE		0x2000
+#define CFG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
@@ -70,13 +88,28 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define REMOVE_COMMANDS	       (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
-				CFG_CMD_IMLS )
-#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | CFG_CMD_NET) \
-				& ~REMOVE_COMMANDS)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_IMLS
+
 
 /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
 /* 300000000 */
@@ -127,12 +160,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */