X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5200.h;h=75040fece6e8361eacd3085a60a105b2fd3e0d57;hb=a55d074dac24dc941f1afb5b4e94b1509bfdda4e;hp=0c1029426c286cffc7074b3e09e35a533196294d;hpb=19bf91f9628f80a55d4f171df71041574882b3d6;p=oweals%2Fu-boot.git

diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 0c1029426c..75040fece6 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -50,10 +50,7 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
  * Serial console configuration
@@ -88,26 +85,32 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_EXT2	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -153,7 +156,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
@@ -200,7 +203,7 @@
 #define CONFIG_ENV_OVERWRITE	1
 #endif
 
-#define CFG_FLASH_CFI_DRIVER	1	   /* Flash is CFI conformant		*/
+#define CONFIG_FLASH_CFI_DRIVER	1	   /* Flash is CFI conformant		*/
 #define CFG_FLASH_CFI		1	   /* Flash is CFI conformant		*/
 #define CFG_FLASH_PROTECTION	1	   /* use hardware protection		*/
 #if 0
@@ -258,7 +261,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -276,6 +279,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */