X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fm28evk.h;h=bb1d6b4f5d035108d75d2ed42da189e197b94efd;hb=d7ac185fd840d1406fcafc1b412482138475af82;hp=e7fd6395e09b932320e5f60990f1f88557d78c3d;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=oweals%2Fu-boot.git

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index e7fd6395e0..bb1d6b4f5d 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -1,32 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIGS_M28EVK_H__
 #define __CONFIGS_M28EVK_H__
 
 /* System configurations */
-#define CONFIG_MX28				/* i.MX28 SoC */
-#define MACH_TYPE_M28EVK	3613
 #define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define	CONFIG_VIDEO
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
@@ -35,7 +19,6 @@
 
 /* Environment */
 #define CONFIG_ENV_SIZE			(16 * 1024)
-#define CONFIG_ENV_IS_IN_NAND
 
 /* Environment is in NAND */
 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
@@ -46,24 +29,8 @@
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT			\
-	"mtdparts=gpmi-nand:"			\
-		"3m(u-boot),"			\
-		"512k(env1),"			\
-		"512k(env2),"			\
-		"14m(boot),"			\
-		"238m(data),"			\
-		"-@4096k(UBI)"
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /* FEC Ethernet on SoC */
@@ -71,11 +38,6 @@
 #define CONFIG_FEC_MXC
 #endif
 
-/* EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#endif
-
 /* RTC */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
@@ -94,13 +56,11 @@
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* SPI */
 #ifdef CONFIG_CMD_SPI
 #define CONFIG_DEFAULT_SPI_BUS		2
-#define CONFIG_DEFAULT_SPI_CS		0
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
 
 /* SPI FLASH */
@@ -122,7 +82,6 @@
 #ifdef CONFIG_VIDEO
 #define	CONFIG_VIDEO_LOGO
 #define	CONFIG_SPLASH_SCREEN
-#define	CONFIG_CMD_BMP
 #define	CONFIG_BMP_16BPP
 #define	CONFIG_VIDEO_BMP_RLE8
 #define	CONFIG_VIDEO_BMP_GZIP
@@ -131,14 +90,13 @@
 
 /* Booting Linux */
 #define CONFIG_BOOTFILE		"fitImage"
-#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Extra Environment */
 #define CONFIG_PREBOOT		"run try_bootscript"
-#define CONFIG_HOSTNAME		m28evk
+#define CONFIG_HOSTNAME		"m28evk"
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyAMA0\0"						\