X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Flsxl.h;h=3ba5548f25ac0812803ee44eae88b29a3ef8a409;hb=9f53146f396d9def8013e29e105729c1f42ae037;hp=7ec82cd4bbda4627e68b17858368b250ecfa7c11;hpb=0ff27d4a94637d4b1937c625d33212375bd118d9;p=oweals%2Fu-boot.git

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 7ec82cd4bb..3ba5548f25 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2012 Michael Walle
  * Michael Walle <michael@walle.cc>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_LSXL_H
@@ -30,23 +29,12 @@
 #define CONFIG_KW88F6281		/* SOC Name */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SHOW_BOOT_PROGRESS
 
 #define CONFIG_KIRKWOOD_GPIO
 
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Enable u-boot API for standalone programs.
- */
-#define CONFIG_API
-
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_IDE
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -55,13 +43,6 @@
 #include "mv-common.h"
 
 /* loading initramfs images without uimage header */
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* ST M25P40 */
-#undef CONFIG_ENV_SPI_MAX_HZ
-#define CONFIG_ENV_SPI_MAX_HZ		25000000
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED		25000000
 
 /*
  *  Environment variables configurations
@@ -69,10 +50,7 @@
 #ifdef CONFIG_SPI_FLASH
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	8
-#define CONFIG_ENV_IS_IN_SPI_FLASH	1
 #define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define CONFIG_ENV_SIZE			0x10000 /* 64k */
@@ -82,8 +60,6 @@
  * Default environment variables
  */
 #define CONFIG_LOADADDR		0x00800000
-#define CONFIG_BOOTCOMMAND	"run bootcmd_${bootsource}"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/sda2"
 
 #if defined(CONFIG_LSXHL)
 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
@@ -99,9 +75,9 @@
 	"kernel_addr=0x00800000\0"					\
 	"ramdisk_addr=0x01000000\0"					\
 	"fdt_addr=0x00ff0000\0"						\
-	"bootcmd_legacy=ide reset "					\
-		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
-		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+	"bootcmd_legacy=sata init "					\
+		"&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
+		"&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
 		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
 		"&& tftpboot ${ramdisk_addr} initrd.img "		\
@@ -109,11 +85,11 @@
 		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
 		"&& bootz ${kernel_addr} "				\
 			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
-	"bootcmd_hdd=ide reset "					\
-		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
-		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
+	"bootcmd_hdd=sata init "					\
+		"&& load sata ${hdpart} ${kernel_addr} /vmlinuz "	\
+		"&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "	\
 		"&& setenv ramdisk_len ${filesize} "			\
-		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
+		"&& load sata ${hdpart} ${fdt_addr} /dtb "		\
 		"&& bootz ${kernel_addr} "				\
 			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_usb=usb start "					\
@@ -154,14 +130,10 @@
 #undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */
 
-#ifdef CONFIG_CMD_IDE
-#undef CONFIG_IDE_LED
-#undef CONFIG_SYS_IDE_MAXBUS
-#define CONFIG_SYS_IDE_MAXBUS		1
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
 #define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
 #endif
 
 #endif /* _CONFIG_LSXL_H */