X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043ardb.h;h=a0d39878b85e59940d22ced906a82d1f088f6675;hb=748ad078eefea2ee5a3c8e53ca46e9e93c2fc7f1;hp=51e7624c63218eab83395ccb8ecda05348bbc1d7;hpb=b07d044d5bfa8c440b172eb3f8a9d537f82e21b6;p=oweals%2Fu-boot.git

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 51e7624c63..a0d39878b8 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2015 Freescale Semiconductor
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS1043ARDB_H__
@@ -9,32 +8,24 @@
 
 #include "ls1043a_common.h"
 
-#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_TEXT_BASE		0x82000000
-#else
-#define CONFIG_SYS_TEXT_BASE		0x60100000
-#endif
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 
 #define CONFIG_LAYERSCAPE_NS_ACCESS
-#define CONFIG_MISC_INIT_R
 
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
-#define CONFIG_NR_DRAM_BANKS		2
 
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_FSL_DDR_BIST
 #ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#endif
 #define CONFIG_SYS_DDR_RAW_TIMING
+#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#define CONFIG_FSL_DDR_BIST
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
@@ -46,6 +37,11 @@
 
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
+#define CONFIG_CMD_SPL
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x10000
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x500
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	30
 #endif
 
 /*
@@ -129,7 +125,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
@@ -167,6 +162,25 @@
 #define CONFIG_SYS_CPLD_FTIM3		0x0
 
 /* IFC Timing Params */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
+#else
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
@@ -204,6 +218,7 @@
 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
 #endif
+#endif
 
 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_CPLD_CSPR_EXT
 #define CONFIG_SYS_CSPR2		CONFIG_SYS_CPLD_CSPR
@@ -232,37 +247,39 @@
 #define CONFIG_ENV_OVERWRITE
 #endif
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x500000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x500000)
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#else
 #if defined(CONFIG_NAND_BOOT)
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_OFFSET		(24 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x20000
 #endif
+#endif
 
 /* FMan */
 #ifndef SPL_NO_FMAN
 #define AQR105_IRQ_MASK			0x40000000
 
 #ifdef CONFIG_NET
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_AQUANTIA
 
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
@@ -278,30 +295,8 @@
 #endif
 #endif
 
-/* QE */
-#ifndef SPL_NO_QE
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
-	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
-#endif
-#define CONFIG_SYS_QE_FW_ADDR     0x60940000
-#endif
-
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-#endif
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_CMD_SCSI
 #ifndef CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT2
 #endif