X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012aqds.h;h=8d7e54305d24870b7a198efbdb3ea595596a3788;hb=e627290ac63c4d43b24407179d7439dd50a50bfe;hp=2d84095e94a6858cbe55f59b3ec5cfd04cc9319d;hpb=9d044fcb8c4558d7ec28089375d2de565bfd2619;p=oweals%2Fu-boot.git

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 2d84095e94..8d7e54305d 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -9,14 +9,15 @@
 
 #include "ls1012a_common.h"
 
-
+/* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
-
-#define CONFIG_SYS_MMDC_CORE_CONTROL_1		0x05180000
-#define CONFIG_SYS_MMDC_CORE_CONTROL_2		0x85180000
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 /*
  * QIXIS Definitions
@@ -28,11 +29,11 @@
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_BRDCFG_REG		0x04
 #define QIXIS_LBMAP_SWITCH		6
-#define QIXIS_LBMAP_MASK		0xf7
+#define QIXIS_LBMAP_MASK		0x08
 #define QIXIS_LBMAP_SHIFT		0
 #define QIXIS_LBMAP_DFLTBANK		0x00
 #define QIXIS_LBMAP_ALTBANK		0x08
-#define QIXIS_RST_CTL_RESET		0x41
+#define QIXIS_RST_CTL_RESET		0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
@@ -57,7 +58,6 @@
 #define RTC
 #define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
-#define CONFIG_CMD_DATE
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -124,21 +124,15 @@
 #define CONFIG_HAS_FSL_XHCI_USB
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_USB_STORAGE
 #endif
 
 /*  MMC  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* SATA */
@@ -147,8 +141,6 @@
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
@@ -156,28 +148,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
 
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI