X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fipek01.h;h=ece72c6aa1d267b7789ed9a3978575030df9a82e;hb=551c3934466503e6c8702df412e2a9ce574557e9;hp=d3821389fd5025f64cc12a42436216f7d5aabc31;hpb=0c0892be0d93a5a892b93739c5eb3bf692fed4ff;p=oweals%2Fu-boot.git diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index d3821389fd..ece72c6aa1 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -5,23 +5,7 @@ * (C) Copyright 2009 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -32,9 +16,8 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPX5200 1 /* ... on MPX5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_MPX5200 1 /* MPX5200 board */ +#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */ #define CONFIG_IPEK01 /* Motherboard is ipek01 */ #define CONFIG_SYS_TEXT_BASE 0xfc000000 @@ -52,7 +35,6 @@ * Serial console configuration */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ @@ -60,18 +42,12 @@ /* * Video configuration for LIME GDC */ -#define CONFIG_VIDEO #ifdef CONFIG_VIDEO #define CONFIG_VIDEO_MB862xx #define CONFIG_VIDEO_MB862xx_ACCEL #define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ @@ -86,8 +62,6 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 #define CONFIG_PCI_MEM_BUS 0x40000000 @@ -98,18 +72,13 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 #define CONFIG_EEPRO100 1 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -/* Partitions */ -#define CONFIG_DOS_PARTITION - /* USB */ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER -#define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB @@ -119,27 +88,15 @@ /* * Command line configuration. */ -#include - -#ifdef CONFIG_VIDEO -#define CONFIG_CMD_BMP /* BMP support */ -#endif -#define CONFIG_CMD_DATE /* support for RTC, date/time...*/ -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_IDE /* IDE harddisk support */ #define CONFIG_CMD_IRQ /* irqinfo */ -#define CONFIG_CMD_MII /* MII support */ #define CONFIG_CMD_PCI /* pciinfo */ -#define CONFIG_CMD_USB /* USB Support */ #define CONFIG_SYS_LOWBOOT 1 /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ @@ -189,36 +146,10 @@ /* * Open firmware flat tree support */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - #define CONFIG_SYS_FLASH_BASE 0xFC000000 #define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ @@ -266,8 +197,6 @@ /* End of used area in DPRAM */ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -/* size in bytes reserved for initial data */ - #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -297,7 +226,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -316,9 +244,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW - /* * Various low-level settings */