X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fintegratorcp.h;h=57610a6511e82166bce46e8c03e3c4c9a38d6887;hb=6ae38b8c583c61f00c2fe9904cafa81932c7faaf;hp=5b4747a575becce9239eed862e998857d58f2f86;hpb=ea393eb1d6a786fc2e895f90abb5f7e7541aef45;p=oweals%2Fu-boot.git

diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 5b4747a575..57610a6511 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,10 +31,18 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* Integrator-specific configuration */
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
 /*
  * High Level Configuration Options
  * (easy to change)
  */
+#define CONFIG_SYS_TEXT_BASE		0x01000000
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		0x10000000
 #define CONFIG_SYS_HZ			1000
@@ -44,16 +52,16 @@
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_MISC_INIT_R		1	/* call misc_init_r during start up */
+
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111
 #define CONFIG_SMC_USE_32_BIT
 #define CONFIG_SMC91111_BASE    0xC8000000
 #undef CONFIG_SMC91111_EXT_PHY
@@ -83,32 +91,14 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#if 0
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS	"root=/dev/nfs nfsroot=<IP address>:/<exported rootfs>  mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
+#include <config_cmd_default.h>
 
-Image 666 Block  0 End Block  0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block  1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
-
-*/
 #define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS	"root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
+#define CONFIG_BOOTARGS	"root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
 
 /*
  * Miscellaneous configurable options
@@ -121,7 +111,6 @@ SIB at Block62 End Block62 address 0x24f80000
 #define CONFIG_SYS_MAXARGS	16			/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE		/* Boot Argument Buffer Size*/
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
 
 /*-----------------------------------------------------------------------
@@ -141,6 +130,12 @@ SIB at Block62 End Block62 address 0x24f80000
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+				    CONFIG_SYS_INIT_RAM_SIZE - \
+				    GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -156,9 +151,11 @@ SIB at Block62 End Block62 address 0x24f80000
 
  */
 #define CONFIG_SYS_FLASH_BASE		0x24000000
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
 #define CONFIG_SYS_MAX_FLASH_SECT	64
 #define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define PHYS_FLASH_SIZE		0x01000000	/* 16MB */
+#define PHYS_FLASH_SIZE			0x01000000	/* 16MB */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
@@ -192,15 +189,6 @@ SIB at Block62 End Block62 address 0x24f80000
 
 #define CONFIG_ENV_SECT_SIZE	0x40000		/* 256KB */
 #define CONFIG_ENV_SIZE		8192		/* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE		0xCB000000	/* CP Registers*/
-#define OS_FLASHPROG		0x00000004	/* Flash register*/
-#define CPMASK_EXTRABANK	0x8
-#define CPMASK_FLASHSIZE	0x4
-#define CPMASK_FLWREN		0x2
-#define CPMASK_FLVPPEN		0x1
 
 /*
  * The ARM boot monitor initializes the board.