X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx31_litekit.h;h=8428d84496ca4f3e40ddb41be0e0c67e58fad2e7;hb=0d485b9095328cdc81b2ee94ff59b988c69b9127;hp=d58ca8a2a10e1bb7f6e7140cd95eaad4245a5277;hpb=869e8ae0323a48974a476d666aa3d03def744f16;p=oweals%2Fu-boot.git

diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index d58ca8a2a1..8428d84496 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -6,39 +6,26 @@
  *
  * Configuration settings for the LogicPD i.MX31 Litekit board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
 #define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
 #define CONFIG_MX31_CLK32	32000
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define CONFIG_SYS_TEXT_BASE	0xa0000000
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX31LITE
+
 /* Temporarily disabled */
 #if 0
 #define CONFIG_OF_LIBFDT		1
@@ -54,30 +41,35 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
-
-#define CONFIG_RTC_MC13783	1
-/* MC13783 connected to CSPI2 and SS0 */
-#define CONFIG_MC13783_SPI_BUS	1
-#define CONFIG_MC13783_SPI_CS	0
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
+
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
+#define CONFIG_FSL_PMIC_BUS	1
+#define CONFIG_FSL_PMIC_CS	0
+#define CONFIG_FSL_PMIC_CLK	1000000
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -105,7 +97,6 @@
 	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X		1
 #define CONFIG_SMC911X_BASE	(CS4_BASE + 0x00020000)
 #define CONFIG_SMC911X_32_BIT	1
@@ -126,23 +117,21 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING	1
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization