X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fidmr.h;h=3821ebcf0d1e4f7d9e63cf1ad6717e6432a0eec9;hb=bc24345e4101a5c996d6b48ce497b09c53025dc6;hp=48915b32e3636fbe1889ef9d73edcc113e9fce5a;hpb=ddd4123336aad881f50dc34892ac150cfa8143fe;p=oweals%2Fu-boot.git

diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 48915b32e3..3821ebcf0d 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -44,6 +44,8 @@
  */
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5
+#define CONFIG_MCFUART
+#define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
 #define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 #define CONFIG_ETHADDR		00:06:3b:01:41:55
@@ -58,6 +60,8 @@
 #define CONFIG_PREBOOT		"echo;echo Type \"run flash_nfs\" to mount root " \
 				"filesystem over NFS; echo"
 
+#define CONFIG_MCFTMR
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -78,18 +82,27 @@
 	"u-boot=/tftpboot/idmr/u-boot.bin\0"				\
 	""
 
+
 /*
- * Commands' definition
+ * BOOTP options
  */
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL		| \
-					CFG_CMD_PING		| \
-					CFG_CMD_NET		| \
-					CFG_CMD_MII)		& \
-					~(CFG_CMD_LOADS		| \
-						CFG_CMD_LOADB))
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
 
 
 /*
@@ -112,14 +125,16 @@
 #define CFG_ENV_IS_IN_FLASH
 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_PROMPT		"=> "
 #define CFG_LONGHELP				/* undef to save memory */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#else
 #define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#endif
 
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args */
@@ -138,11 +153,27 @@
 /*
  * Ethernet
  */
-#define FEC_ENET
-#define CONFIG_NET_RETRY_COUNT	5
-#define CFG_ENET_BD_BASE	0x480000
-#define CFG_DISCOVER_PHY	1
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
 #define CONFIG_MII		1
+#	define CFG_DISCOVER_PHY
+#	define CFG_RX_ETH_BUFFER	8
+#	define CFG_FAULT_ECHO_LINK_DOWN
+
+#	define CFG_FEC0_PINMUX		0
+#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define MCFFEC_TOUT_LOOP 	50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CFG_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CFG_FAULT_ECHO_LINK_DOWN
+#			define CFG_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CFG_DISCOVER_PHY */
+#endif
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -177,7 +208,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
 
 /* FLASH organization */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
@@ -194,4 +225,20 @@
 
 /* Port configuration */
 #define CFG_FECI2C		0xF0
+
+
+/* Dynamic MTD partition support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=idmr-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=idmr-0:128k(u-boot),"	\
+						"64k(env),"	\
+						"640k(kernel),"	\
+						"2m(rootfs),"	\
+						"-(user)";
+
+#if defined(CONFIG_CMD_MII)
+#error "MII commands don't work on iDMR board and should not be enabled."
+#endif
+
 #endif /* _IDMR_H */