X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fhymod.h;h=2547afb3cf0d8a3915936ff01acd3478517258ff;hb=f930922f061ea7bf585296859d1c14194c24b840;hp=e5680a5d8759da7625910e1f250336671b6322e1;hpb=c837dcb1a316745092567bfe4fb266d0941884ff;p=oweals%2Fu-boot.git

diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index e5680a5d87..2547afb3cf 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
 #define CONFIG_HYMOD		1	/* ...on a Hymod board		*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
 
@@ -68,8 +69,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC	*/
 #define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC	*/
@@ -173,27 +173,44 @@
 
 #define CONFIG_LAST_STAGE_INIT
 
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-					CFG_CMD_BEDBUG	| \
-					CFG_CMD_BMP	| \
-					CFG_CMD_DOC	| \
-					CFG_CMD_FDC	| \
-					CFG_CMD_FDOS	| \
-					CFG_CMD_FPGA    | \
-					CFG_CMD_HWFLOW	| \
-					CFG_CMD_IDE	| \
-					CFG_CMD_JFFS2	| \
-					CFG_CMD_NAND	| \
-					CFG_CMD_MMC	| \
-					CFG_CMD_PCMCIA	| \
-					CFG_CMD_PCI	| \
-					CFG_CMD_USB	| \
-					CFG_CMD_SCSI	| \
-					CFG_CMD_SPI	| \
-					CFG_CMD_VFD	) )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_MFSL
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
 
 #ifdef DEBUG
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
@@ -212,7 +229,7 @@
 #define DEBUG_BOOTKEYS		0
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -241,7 +258,7 @@
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -389,12 +406,13 @@
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
 #define	CFG_ENV_ADDR	(CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
 #endif
 
@@ -707,4 +725,21 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
+
 #endif	/* __CONFIG_H */