X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fhrcon.h;h=c2ffc081478e2a6630dce4fdde92cecfff273a5e;hb=f3f3efff91f13df022f0c19f346cd74ac864bd85;hp=84d0928a6787b8c3eca0767b5beb1eef0a886b66;hpb=5c3b6dc1fb415d316744b284513c908e96426567;p=oweals%2Fu-boot.git

diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index 84d0928a67..c2ffc08147 100644
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -20,30 +20,17 @@
 
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
-#ifdef CONFIG_HRCON_DH
-#define CONFIG_IDENT_STRING	" hrcon dh 0.01"
-#else
-#define CONFIG_IDENT_STRING	" hrcon 0.01"
-#endif
-
-
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
-/* new uImage format support */
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-
 #define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 
 #define CONFIG_CMD_FPGAD
 #define CONFIG_CMD_IOLOOP
@@ -304,7 +291,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	2
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -315,13 +301,7 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -545,10 +525,7 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
@@ -560,12 +537,8 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
-#undef CONFIG_ZERO_BOOTDELAY_CHECK	/* ignore keypress on bootdelay==0 */
-
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
@@ -638,7 +611,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
 
 #define CONFIG_HOSTNAME		hrcon
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
@@ -678,5 +650,4 @@ void fpga_control_clear(unsigned int bus, int pin);
 
 #define CONFIG_BOOTCOMMAND		CONFIG_MMCBOOTCOMMAND
 
-
 #endif	/* __CONFIG_H */