X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fhmi1001.h;h=1c74a2e96e93c8abb614a6471a9516b5f92f8d01;hb=690e425844511fe37d3315e86414d0a9e3accd1c;hp=8b0b773b2a4248488bedc450440fe115555bcf4f;hpb=6ca803750e1e08fce26e508f1c35170bf9259bb4;p=oweals%2Fu-boot.git

diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 8b0b773b2a..1c74a2e96e 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -33,10 +17,11 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define CONFIG_HMI1001		1	/* HMI1001 board			*/
 
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFFF00000
+#endif
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define CONFIG_BOARD_EARLY_INIT_R
 
@@ -80,7 +65,7 @@
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
-#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
 #   define CONFIG_SYS_LOWBOOT		1
 #endif
 
@@ -149,7 +134,7 @@
 #define CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
 #define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip */
 
-#define CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
@@ -195,16 +180,15 @@
 #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
 
 #ifdef CONFIG_POST
-#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
 #endif
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -230,7 +214,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
@@ -253,8 +236,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */