X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fhighbank.h;h=5cefddc2e0eedbdafa6ca099b415b2648e8522d9;hb=826d06dbdd0e29ab0d8bd76d1ca640e2dfdb076c;hp=62cc08cebd388c06274cec673d22b89ffb53c3d2;hpb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;p=oweals%2Fu-boot.git

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 62cc08cebd..5cefddc2e0 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -1,33 +1,25 @@
 /*
  * Copyright 2010-2011 Calxeda, Inc.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_L2_OFF
+#include <config_distro_defaults.h>
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
-#define CFG_HZ				1000
-#define CONFIG_SYS_HZ			CFG_HZ
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_FIT
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 
+#define CONFIG_SYS_TIMER_RATE		(150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER	(0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
 /*
  * Size of malloc() pool
  */
@@ -38,7 +30,7 @@
 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
 #define CONFIG_CONS_INDEX		0
 
-#define CONFIG_BAUDRATE			38400
+#define CONFIG_BAUDRATE			115200
 
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
@@ -46,6 +38,7 @@
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 
 #define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
@@ -53,51 +46,34 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CALXEDA_XGMAC
 
-/* PXE support */
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
-#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv7.highbank"
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_SCSI
+
+#define CONFIG_BOOT_RETRY_TIME		-1
+#define CONFIG_RESET_TO_RETRY
+
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT		"Highbank #"
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					 sizeof(CONFIG_SYS_PROMPT)+16)
 
 #define CONFIG_SYS_LOAD_ADDR		0x800000
+#define CONFIG_SYS_64BIT_LBA
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
+ * The DRAM is already setup, so do not touch the DT node later.
  */
-#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS		0
 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)