X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fgrsim_leon2.h;h=83fd7fae5000ed70c469f4adf9ede83f07a24e5e;hb=618a51e9aefe1e03f498ea48bfab70a0b2c9be39;hp=8be98983c9f6a6667b58d1c18fedbeee273fbcfc;hpb=e7f9350525d73233d4eaf1793f8fe618e9fd4910;p=oweals%2Fu-boot.git

diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 8be98983c9..83fd7fae50 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -46,21 +46,10 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_BDI		/* bdinfo			*/
-#define CONFIG_CMD_CONSOLE	/* coninfo			*/
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments		*/
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
-#define CONFIG_CMD_LOADB	/* loadb			*/
-#define CONFIG_CMD_LOADS	/* loads			*/
-#define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable	*/
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
-#define CONFIG_CMD_SOURCE	/* "source" command support	*/
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
 
 /*
  * Autobooting
@@ -90,7 +79,6 @@
 	"rootpath=/export/roofs\0"					\
 	"scratch=40000000\0"					\
 	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"ethaddr=00:00:7A:CC:00:12\0" \
 	"bootargs=console=ttyS0,38400" \
 	""
 #define CONFIG_NETMASK 255.255.255.0
@@ -240,16 +228,6 @@
  */
 /*#define CONFIG_GRETH	1*/
 
-/* Default HARDWARE address */
-#define GRETH_HWADDR_0 0x00
-#define GRETH_HWADDR_1 0x00
-#define GRETH_HWADDR_2 0x7A
-#define GRETH_HWADDR_3 0xcc
-#define GRETH_HWADDR_4 0x00
-#define GRETH_HWADDR_5 0x12
-
-#define CONFIG_ETHADDR   00:00:7a:cc:00:12
-
 /*
  * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
  */
@@ -286,8 +264,6 @@
 #define CONFIG_SYS_GRLIB_MEMCFG3  0x00136000
 
 /*** LEON2 UART 1 ***/
-#define CONFIG_SYS_LEON2_UART1_SCALER \
-	((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* UART1 Define to 1 or 0 */
 #define LEON2_UART1_LOOPBACK_ENABLE 0
@@ -297,9 +273,6 @@
 
 /*** LEON2 UART 2 ***/
 
-#define CONFIG_SYS_LEON2_UART2_SCALER \
-	((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
-
 /* UART2 Define to 1 or 0 */
 #define LEON2_UART2_LOOPBACK_ENABLE 0
 #define LEON2_UART2_FLOWCTRL_ENABLE 0