X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fgr_xc3s_1500.h;h=f675b7584393bb66471f3dc05a251f91810376d8;hb=9368aa6a680f150755a233be9f97956bba5a915e;hp=7f0c5be0c92b1cb8ecfc5173a6a5cc1f5105ae0e;hpb=5b9c79a81db80c3f9e50c77477957cd803429af8;p=oweals%2Fu-boot.git

diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 7f0c5be0c9..f675b75843 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -7,27 +7,25 @@
  * (C) Copyright 2007
  * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
 #define __CONFIG_H__
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  * (easy to change)
  */
 
-#define CONFIG_LEON3		/* This is an LEON3 CPU */
-#define CONFIG_LEON		1	/* This is an LEON CPU */
 #define CONFIG_GRXC3S1500	1	/* ... on GR-XC3S-1500 board */
 
 /* CPU / AMBA BUS configuration */
 #define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
 
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
 /*
  * Serial console configuration
  */
@@ -42,10 +40,7 @@
 /*
  * Supported commands
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
@@ -222,22 +217,12 @@
  */
 #define CONFIG_GRETH	1
 
-/* Default GRETH Ethernet HARDWARE address */
-#define GRETH_HWADDR_0 0x00
-#define GRETH_HWADDR_1 0x00
-#define GRETH_HWADDR_2 0x7a
-#define GRETH_HWADDR_3 0xcc
-#define GRETH_HWADDR_4 0x00
-#define GRETH_HWADDR_5 0x12
-
-#define CONFIG_ETHADDR   00:00:7a:cc:00:12
 #define CONFIG_PHY_ADDR	 0x00
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
@@ -252,8 +237,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
@@ -267,35 +250,33 @@
 
 /***** Gaisler GRLIB IP-Cores Config ********/
 
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
 #define CONFIG_SYS_GRLIB_SDRAM    0
 
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
 
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
 
 /* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
 
 /* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
 
 /* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
+#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-XC3S-1500"
 
 /* default kernel command line */
 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"