X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fgr_cpci_ax2000.h;h=5bbf1aaae80903d2b921b9f8b66877934e801072;hb=fb2dea60e8f355ae00d427db09112a90839c96ec;hp=dc62ea30c26c40e0c1a3f68903fa3bbbaf52d4ea;hpb=17dd883c5b76bdade0f7a48f2eb02d918a5ebef9;p=oweals%2Fu-boot.git diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index dc62ea30c2..5bbf1aaae8 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -8,23 +8,7 @@ * (C) Copyright 2008 * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H__ @@ -35,8 +19,6 @@ * (easy to change) */ -#define CONFIG_LEON3 /* This is an LEON3 CPU */ -#define CONFIG_LEON 1 /* This is an LEON CPU */ #define CONFIG_CPCI_AX2000 1 /* ... on GR-CPCI-AX2000 board */ #define CONFIG_LEON_RAM_SRAM 1 @@ -77,10 +59,7 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_AMBAPP #define CONFIG_CMD_PING #define CONFIG_CMD_DIAG #define CONFIG_CMD_IRQ @@ -108,7 +87,7 @@ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \ + "getkernel=tftpboot $(scratch) $(bootfile)\0" \ "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0" #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM @@ -135,9 +114,9 @@ #define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_SERVERIP 192.168.0.20 #define CONFIG_IPADDR 192.168.0.206 -#define CONFIG_ROOTPATH /export/rootfs +#define CONFIG_ROOTPATH "/export/rootfs" #define CONFIG_HOSTNAME ax2000 -#define CONFIG_BOOTFILE /uImage +#define CONFIG_BOOTFILE "/uImage" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -291,7 +270,6 @@ /* * Ethernet configuration uses on board SMC91C111 */ -#define CONFIG_NET_MULTI #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */ #define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ @@ -299,14 +277,12 @@ /*#define CONFIG_SHOW_ACTIVITY*/ #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 #define CONFIG_PHY_ADDR 0x00 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -321,8 +297,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ @@ -336,40 +310,38 @@ /***** Gaisler GRLIB IP-Cores Config ********/ -/* AMBA Plug & Play info display on startup */ -/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/ - #define CONFIG_SYS_GRLIB_SDRAM 0 +/* No SDRAM Configuration */ +#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1 + /* See, GRLIB Docs (grip.pdf) on how to set up * These the memory controller registers. */ -#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11)) +#define CONFIG_SYS_GRLIB_ESA_MCTRL1 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11)) #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000 #else -#define CONFIG_SYS_GRLIB_MEMCFG2 0x82205260 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82205260 #endif -#define CONFIG_SYS_GRLIB_MEMCFG3 0x0809a000 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x0809a000 -#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11)) +/* GRLIB FT-MCTRL configuration */ +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11)) #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000 #else -#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82205260 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82205260 #endif -#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x0809a000 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x0809a000 /* no DDR controller */ -#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000 +#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1 /* no DDR2 Controller */ -#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000 -#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000 - -/* Calculate scaler register value from default baudrate */ -#define CONFIG_SYS_GRLIB_APBUART_SCALER \ - ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10) +#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 /* Identification string */ #define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"