X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fexynos5420-common.h;h=2d362f3961519949a0b7fd0f945996a2ead90eae;hb=1204b9675ed670da9317d87a5a29f06b6412745b;hp=ef6e1551ab0086a139e4dc2e03cc95c94d95bdc9;hpb=9b416a9f4ca7cf5ac4d5f7143d67edde7f7d7326;p=oweals%2Fu-boot.git

diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h
index ef6e1551ab..2d362f3961 100644
--- a/include/configs/exynos5420-common.h
+++ b/include/configs/exynos5420-common.h
@@ -1,41 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Samsung Electronics
  *
  * Configuration settings for the SAMSUNG EXYNOS5420 SoC
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_EXYNOS5420_H
 #define __CONFIG_EXYNOS5420_H
 
 #define CONFIG_EXYNOS5420
-/* A variant of Exynos5420 (Exynos5 Family) */
-#define CONFIG_EXYNOS5800
-
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_ENV_SPI_BASE	0x12D30000
-#define FLASH_SIZE		(0x4 << 20)
-#define CONFIG_ENV_OFFSET	(FLASH_SIZE - CONFIG_BL2_SIZE)
-#define CONFIG_SPI_BOOTING
 
-#include <configs/exynos5-common.h>
+#define CONFIG_EXYNOS5_DT
 
-#define CONFIG_ARCH_EARLY_INIT_R
-
-#define MACH_TYPE_SMDK5420	8002
-#define CONFIG_MACH_TYPE	MACH_TYPE_SMDK5420
+/* Provide the MACH_TYPE value that the vendor kernel requires. */
+#define CONFIG_MACH_TYPE		8002
 
 #define CONFIG_VAR_SIZE_SPL
 
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_TEXT_BASE		0x23E00000
-#ifdef CONFIG_VAR_SIZE_SPL
-#define CONFIG_SPL_TEXT_BASE		0x02024410
-#else
-#define CONFIG_SPL_TEXT_BASE		0x02024400
-#endif
 #define CONFIG_IRAM_TOP			0x02074000
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(30 * 1024)
@@ -43,19 +24,17 @@
 #define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi"	\
 				"exynos5420-peach-pit exynos5420-smdk5420"
 
-#define CONFIG_MAX_I2C_NUM	11
-
-#define CONFIG_BOARD_REV_GPIO_COUNT	2
+#define CONFIG_PHY_IRAM_BASE		0x02020000
 
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+/* Address for relocating helper code (Last 4 KB of IRAM) */
+#define CONFIG_EXYNOS_RELOCATE_CODE_BASE	(CONFIG_IRAM_TOP - 0x1000)
 
 /*
- * Put the initial stack pointer 1KB below this to allow room for the
- * SPL marker. This value is arbitrary, but gd_t is placed starting here.
+ * Low Power settings
  */
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
+#define CONFIG_LOWPOWER_FLAG		0x02020028
+#define CONFIG_LOWPOWER_ADDR		0x0202002C
 
-/* Miscellaneous configurable options */
-#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
+#define CONFIG_USB_XHCI_EXYNOS
 
 #endif	/* __CONFIG_EXYNOS5420_H */