X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fedb93xx.h;h=f012af547fc85a0d1632ec2a74184164616a53b2;hb=089795090a627f4216c5f21eaf436ba1672cf02e;hp=9080b9a473df5de4f8d32bc97df9cd07c6bd4162;hpb=0675f992dbf4a785a05a1baf149c2bce6aa5fe90;p=oweals%2Fu-boot.git

diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index 9080b9a473..f012af547f 100644
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -74,7 +74,6 @@
 #define CONFIG_EP93XX		1		/* This is a Cirrus Logic 93xx SoC */
 
 #define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
-#undef CONFIG_USE_IRQ				/* Don't need IRQ/FIQ */
 
 /* Monitor configuration */
 #undef CONFIG_CMD_DATE
@@ -91,7 +90,6 @@
 /* Serial port hardware configuration */
 #define CONFIG_PL010_SERIAL
 #define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, \
                         115200, 230400}
 #define CONFIG_SYS_SERIAL0		0x808C0000
@@ -102,20 +100,7 @@
 #define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0}
 
 /* Status LED */
-#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_GREEN		0
-#define STATUS_LED_RED			1
-/* Green */
-#define STATUS_LED_BIT			STATUS_LED_GREEN
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1			STATUS_LED_RED
-#define STATUS_LED_STATE1		STATUS_LED_OFF
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
 /* Optional value */
-#define STATUS_LED_BOOT			STATUS_LED_BIT
 
 /* Network hardware configuration */
 #define CONFIG_DRIVER_EP93XX_MAC
@@ -175,12 +160,6 @@
 
 /* Run-time memory allocatons */
 #define CONFIG_SYS_GBL_DATA_SIZE	128
-#define CONFIG_STACKSIZE		(128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
-#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
-#endif
 
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 
@@ -236,8 +215,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ep93xx-ohci"
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x80020000
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Define to disable flash configuration*/
 /* #define CONFIG_EP93XX_NO_FLASH_CFG */