X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Feb_cpux9k2.h;h=9046cf0c01f712e11820992b27eec0beb5ddcf32;hb=76d4ae251e4a2f7724f4462baccc2779074fa937;hp=754fc8bf8b61dd74af507eee9332541599917828;hpb=25ddd1fb0a2281b182529afbc8fda5de2dc16d96;p=oweals%2Fu-boot.git

diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 754fc8bf8b..9046cf0c01 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -29,18 +29,20 @@
 
 /*--------------------------------------------------------------------------*/
 
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-#define CONFIG_EB_CPUX9K2	1	/* on an EP+CPUX9K2 Board	*/
-#define USE_920T_MMU		1
+#define CONFIG_AT91RM9200		/* It's an Atmel AT91RM9200 SoC	*/
+#define CONFIG_EB_CPUX9K2		/* on an EP+CPUX9K2 Board	*/
+#define USE_920T_MMU
 
-#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_VERSION_VARIABLE
 #define CONFIG_IDENT_STRING	" on EB+CPUx9K2"
 
-#include <asm/arch/hardware.h>	/* needed for port definitions */
+#include <asm/hardware.h>	/* needed for port definitions */
 
 #define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_EARLY_INIT_F
 
+#define MACH_TYPE_EB_CPUX9K2		1977
+#define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
 /*--------------------------------------------------------------------------*/
 #define CONFIG_SYS_TEXT_BASE 		0x00000000
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
@@ -70,7 +72,7 @@
 #define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
 
-#define AT91_SLOW_CLOCK			32768		/* slow clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
 
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
@@ -175,13 +177,13 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
 
 #define CONFIG_BAUDRATE 115200
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU			/* define DBGU as console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
+#define CONFIG_USART_ID		0/* ignored in arm */
 
 /*
  * network
  */
-#define CONFIG_NET_MULTI		1
 
 #define CONFIG_NET_RETRY_COUNT		10
 #define CONFIG_RESET_PHY_R		1
@@ -217,19 +219,19 @@
 #define CONFIG_SYS_I2C_INIT_BOARD
 
 #define I2C_INIT	i2c_init_board();
-#define I2C_ACTIVE	writel(AT91_PMX_AA_TWD, &pio->pioa.mddr);
-#define I2C_TRISTATE	writel(AT91_PMX_AA_TWD, &pio->pioa.mder);
-#define I2C_READ	((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0)
+#define I2C_ACTIVE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
+#define I2C_TRISTATE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
+#define I2C_READ	((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
 #define I2C_SDA(bit)						\
 	if (bit)						\
-		writel(AT91_PMX_AA_TWD, &pio->pioa.sodr);	\
+		writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr);	\
 	else							\
-		writel(AT91_PMX_AA_TWD, &pio->pioa.codr);
+		writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
 #define I2C_SCL(bit)						\
 	if (bit)						\
-		writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr);	\
+		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr);	\
 	else							\
-		writel(AT91_PMX_AA_TWCK, &pio->pioa.codr);
+		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
 
 #define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SPEED)
 
@@ -268,7 +270,6 @@
 
 /* NAND */
 
-#define CONFIG_SYS_NAND_MAX_CHIPS	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_DBW_8		1