X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fdebris.h;h=7667e5e60e3c184f5f7db8290bdae7a0b3bbeb69;hb=78549bbf44bd2c8d1a0730fb068836071751afaa;hp=587798ce75410b17f5f7bf8ef7508b732373ea7c;hpb=15647dc7fd86bbaeb68740929ecb9f8473c7ceae;p=oweals%2Fu-boot.git

diff --git a/include/configs/debris.h b/include/configs/debris.h
index 587798ce75..7667e5e60e 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -45,9 +45,9 @@
 #define CONFIG_BOOTCOMMAND \
 	"tftp 800000 pImage; " \
 	"setenv bootargs console=ttyS0,9600 init=/linuxrc " \
-	"root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
-	"ip=$(ipaddr):$(serverip):$(gatewayip):" \
-	"$(netmask):$(hostname):eth0:none " \
+	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+	"${netmask}:${hostname}:eth0:none " \
 	"mtdparts=phys:12m(root),-(kernel); " \
 	"bootm 800000"
 
@@ -122,23 +122,35 @@
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_DRAM_SPEED	100		/* MHz */
 
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL	| \
-				  CFG_CMD_ASKENV	| \
-				  CFG_CMD_CACHE		| \
-				  CFG_CMD_DATE		| \
-				  CFG_CMD_DHCP		| \
-				  CFG_CMD_DIAG		| \
-				  CFG_CMD_EEPROM	| \
-				  CFG_CMD_ELF		| \
-				  CFG_CMD_I2C		| \
-				  CFG_CMD_JFFS2		| \
-				  CFG_CMD_KGBD		| \
-				  CFG_CMD_PCI		| \
-				  CFG_CMD_PING		| \
-				  CFG_CMD_SAVES		| \
-				  CFG_CMD_SDRAM)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_KGBD
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
 
 
 /*
@@ -175,7 +187,8 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CFG_MAX_RAM_SIZE	0x20000000
+#define CONFIG_VERY_BIG_RAM
 
 #define CFG_RESET_ADDRESS	0xFFF00100
 
@@ -216,8 +229,27 @@
 #define CFG_FLASH_RANGE_SIZE	0x01000000
 #define FLASH_BASE0_PRELIM	0x7C000000	/* debris flash		*/
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=debris-0"
+#define MTDPARTS_DEFAULT	"mtdparts=debris-0:-(jffs2)"
+*/
 
 #define CFG_ENV_IS_IN_NVRAM      1
 #define CONFIG_ENV_OVERWRITE     1
@@ -415,7 +447,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif