X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_pxa270.h;h=111bb27126aee206434d609b22f12e899423ecdb;hb=8947145cd0ae8adf1c5dc0ae6756d49bf5330b48;hp=f5f648d7aa1c8e6d5b8fa166b3a2779fb1cb296a;hpb=ebca902aeb3af3eaedd2787928184ad84a86b98f;p=oweals%2Fu-boot.git

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index f5f648d7aa..111bb27126 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Toradex Colibri PXA270 configuration file
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
  * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef	__CONFIG_H
@@ -17,15 +16,11 @@
 /* Avoid overwriting factory configuration block */
 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
-/* We will never enable dcache because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
 /*
  * Environment settings
  */
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
-#define	CONFIG_ARCH_CPU_INIT
 #define	CONFIG_BOOTCOMMAND						\
 	"if fatload mmc 0 0xa0000000 uImage; then "			\
 		"bootm 0xa0000000; "					\
@@ -85,7 +80,6 @@
 /*
  * DRAM Map
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define	PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
 
@@ -107,8 +101,6 @@
 #define	PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
 #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
-#define	CONFIG_SYS_FLASH_CFI
-#define	CONFIG_FLASH_CFI_DRIVER		1
 #define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 
 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
@@ -118,19 +110,12 @@
 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_LOCK_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(25 * CONFIG_SYS_HZ)
-
-#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-#define	CONFIG_SYS_FLASH_PROTECTION		1
 #endif
 
 #define	CONFIG_SYS_MONITOR_BASE		0x0
 #define	CONFIG_SYS_MONITOR_LEN		0x40000
 
 /* Skip factory configuration block */
-#define	CONFIG_ENV_ADDR			\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
-#define	CONFIG_ENV_SIZE			0x40000
-#define	CONFIG_ENV_SECT_SIZE		0x40000
 
 /*
  * GPIO settings