X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fcalimain.h;h=4c476179eb0156b56f82544c19bea7752052a635;hb=d1ec9461f2a2b478b3682dfc3f0f72e3fdd104c1;hp=7d8bb4790d64f22e7ac297a4801c1520c3660d74;hpb=ef0f2f57524ec85fb9058a23298f2c4995e0d950;p=oweals%2Fu-boot.git

diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index 7d8bb4790d..4c476179eb 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -16,25 +16,16 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
-#define MACH_TYPE_CALIMAIN	3528
 #define CONFIG_MACH_TYPE	MACH_TYPE_CALIMAIN
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_DAVINCI_CALIMAIN
-#define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
-#define CONFIG_SOC_DA850		/* TI DA850 SoC */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ		calimain_get_osc_freq()
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_TEXT_BASE		0x60000000
-#define CONFIG_DA850_LOWLEVEL
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DA8XX_GPIO
 #define CONFIG_HW_WATCHDOG
@@ -47,20 +38,6 @@
 /*
  * PLL configuration
  */
-#define CONFIG_SYS_DV_CLKMODE          0
-#define CONFIG_SYS_DA850_PLL0_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
-#define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
-
-#define CONFIG_SYS_DA850_PLL1_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
 
 #define CONFIG_SYS_DA850_PLL0_PLLM \
 	((calimain_get_osc_freq() == 25000000) ? 23 : 24)
@@ -152,15 +129,12 @@
 /*
  * Serial Driver info
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_PROTECTION
@@ -182,7 +156,6 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM	1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
@@ -194,19 +167,13 @@
  * U-Boot general configuration
  */
 #define CONFIG_BOOTFILE        "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "Calimain > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_LOADADDR        0xc0700000
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -216,10 +183,7 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS           ""
 #define CONFIG_BOOTCOMMAND        "run checkupdate; run checkbutton;"
-#define CONFIG_BOOTDELAY          0
-#define CONFIG_ZERO_BOOTDELAY_CHECK   /* check for keypress on bootdelay==0 */
 #define CONFIG_BOOT_RETRY_TIME    60  /* continue boot after 60 s inactivity */
 #define CONFIG_RESET_TO_RETRY
 
@@ -308,30 +272,11 @@
 	"echo Product: $product; "	\
 	"gpio c 1; gpio c 2;"
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_GPIO
-
-#ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
-#endif
-
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
 /* initial stack pointer in internal SRAM */
 #define CONFIG_SYS_INIT_SP_ADDR		(0x8001ff00)
 
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	DAVINCI_RTC_BASE
 
@@ -339,4 +284,6 @@
 int calimain_get_osc_freq(void);
 #endif
 
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */