X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fblackstamp.h;h=64fce30584c643abcb245f90f02374f0dccea3af;hb=a51425d2a4e51381423bff9329042e66fedb7cb6;hp=887f3fb3a348338c445f0f7bb9515ffb3c89e553;hpb=6973fb414c36b25b4622917d6a223510be0678f5;p=oweals%2Fu-boot.git

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 887f3fb3a3..64fce30584 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -30,7 +30,7 @@
 /*
  * Board settings
  */
-#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20300300
 
 /* FLASH/ETHERNET uses the same address range
@@ -69,13 +69,13 @@
  * Network settings
  */
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 #define CONFIG_IPADDR		192.168.0.15
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_GATEWAYIP	192.168.0.1
 #define CONFIG_SERVERIP		192.168.0.2
 #define CONFIG_HOSTNAME		blackstamp
-#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
+#define CONFIG_ROOTPATH		"/checkout/uClinux-dist/romfs"
 #define CONFIG_SYS_AUTOLOAD		"no"
 
 /* To remove hardcoding and enable MAC storage in EEPROM  */
@@ -108,7 +108,7 @@
 
 #include <config_cmd_default.h>
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 # define CONFIG_CMD_DHCP
 # define CONFIG_CMD_PING
 #else
@@ -205,32 +205,8 @@
  * them yet. You can (and probably should) change these values!
  */
 #ifdef CONFIG_SOFT_I2C
-
-#define PF_SCL			PF9
-#define PF_SDA			PF8
-
-#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SDA; \
-		else \
-			*pFIO_FLAG_C = PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_SCL(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SCL; \
-		else \
-			*pFIO_FLAG_C = PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
 #define CONFIG_SYS_I2C_SPEED		50000
 #define CONFIG_SYS_I2C_SLAVE		0xFE
 #endif