X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fbfin_adi_common.h;h=3fbf5c68e71a1c38f619afd3df495bad042759ce;hb=63777665169971ee2d8a69b8ebfbc71f6acf2924;hp=1896cf53d57d81fe3eb513f35a7afa61c094e0a2;hpb=790af6ed08cc3675267191eb60403bd4f0d9a03c;p=oweals%2Fu-boot.git

diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 1896cf53d5..3fbf5c68e7 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -34,10 +34,14 @@
 #  define CONFIG_DOS_PARTITION
 # endif
 # ifdef CONFIG_MMC
+#  define CONFIG_CMD_EXT2
 #  define CONFIG_CMD_FAT
 #  define CONFIG_CMD_MMC
 #  define CONFIG_DOS_PARTITION
 # endif
+# ifdef CONFIG_MMC_SPI
+#  define CONFIG_CMD_MMC_SPI
+# endif
 # ifdef CONFIG_USB
 #  define CONFIG_CMD_EXT2
 #  define CONFIG_CMD_FAT
@@ -47,6 +51,7 @@
 # endif
 # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
 #  define CONFIG_CMD_NAND
+#  define CONFIG_CMD_NAND_LOCK_UNLOCK
 # endif
 # ifdef CONFIG_POST
 #  define CONFIG_CMD_DIAG
@@ -68,6 +73,7 @@
 # endif
 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #  define CONFIG_CMD_I2C
+#  define CONFIG_SOFT_I2C_READ_REPEATED_START
 # endif
 # ifdef CONFIG_SYS_NO_FLASH
 #  undef CONFIG_CMD_FLASH
@@ -82,8 +88,9 @@
 # define CONFIG_CMD_CACHE
 # define CONFIG_CMD_CPLBINFO
 # define CONFIG_CMD_ELF
-# define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_GPIO
 # define CONFIG_CMD_KGDB
+# define CONFIG_CMD_LDRINFO
 # define CONFIG_CMD_REGINFO
 # define CONFIG_CMD_STRINGS
 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
@@ -104,6 +111,10 @@
 #ifndef CONFIG_BAUDRATE
 # define CONFIG_BAUDRATE	57600
 #endif
+#ifndef CONFIG_DEBUG_EARLY_SERIAL
+# define CONFIG_SERIAL_MULTI
+# define CONFIG_SYS_BFIN_UART
+#endif
 
 /*
  * Debug Settings
@@ -116,10 +127,12 @@
 /*
  * Env Settings
  */
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
-# define CONFIG_BOOTDELAY	-1
-#else
-# define CONFIG_BOOTDELAY	5
+#ifndef CONFIG_BOOTDELAY
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+#  define CONFIG_BOOTDELAY	-1
+# else
+#  define CONFIG_BOOTDELAY	5
+# endif
 #endif
 #ifndef CONFIG_BOOTCOMMAND
 # define CONFIG_BOOTCOMMAND	"run ramboot"
@@ -166,9 +179,12 @@
 #   define UBOOT_ENV_UPDATE \
 		"eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
+#   ifndef CONFIG_BFIN_SPI_IMG_SIZE
+#    define CONFIG_BFIN_SPI_IMG_SIZE 0x40000
+#   endif
 #   define UBOOT_ENV_UPDATE \
 		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
-		"sf erase 0 0x40000;" \
+		"sf erase 0 " MK_STR(CONFIG_BFIN_SPI_IMG_SIZE) ";" \
 		"sf write $(loadaddr) 0 $(filesize)"
 #  endif
 # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
@@ -187,7 +203,8 @@
 	"nc=" \
 		"set ncip ${serverip};" \
 		"set stdin nc;" \
-		"set stdout nc" \
+		"set stdout nc;" \
+		"set stderr nc" \
 		"\0"
 # else
 #  define NETCONSOLE_ENV
@@ -228,31 +245,75 @@
 #else
 # define NETWORK_ENV_SETTINGS
 #endif
+#ifndef BOARD_ENV_SETTINGS
+# define BOARD_ENV_SETTINGS
+#endif
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	NAND_ENV_SETTINGS \
 	NETWORK_ENV_SETTINGS \
-	FLASHBOOT_ENV_SETTINGS
+	FLASHBOOT_ENV_SETTINGS \
+	BOARD_ENV_SETTINGS
 
 /*
  * Network Settings
  */
 #ifdef CONFIG_CMD_NET
-# define CONFIG_IPADDR		192.168.0.15
 # define CONFIG_NETMASK		255.255.255.0
-# define CONFIG_GATEWAYIP	192.168.0.1
-# define CONFIG_SERVERIP	192.168.0.2
-# define CONFIG_ROOTPATH	/romfs
+# ifndef CONFIG_IPADDR
+#  define CONFIG_IPADDR		192.168.0.15
+#  define CONFIG_GATEWAYIP	192.168.0.1
+#  define CONFIG_SERVERIP	192.168.0.2
+# endif
+# ifndef CONFIG_ROOTPATH
+#  define CONFIG_ROOTPATH	"/romfs"
+# endif
 # ifdef CONFIG_CMD_DHCP
 #  ifndef CONFIG_SYS_AUTOLOAD
 #   define CONFIG_SYS_AUTOLOAD "no"
 #  endif
 # endif
+# define CONFIG_IP_DEFRAG
 # define CONFIG_NET_RETRY_COUNT 20
 #endif
 
+/*
+ * Flash Settings
+ */
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+
+/*
+ * SPI Settings
+ */
+#ifdef CONFIG_SPI_FLASH_ALL
+# define CONFIG_SPI_FLASH_ATMEL
+# define CONFIG_SPI_FLASH_EON
+# define CONFIG_SPI_FLASH_MACRONIX
+# define CONFIG_SPI_FLASH_SPANSION
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_SPI_FLASH_STMICRO
+# define CONFIG_SPI_FLASH_WINBOND
+#endif
+
+/*
+ * I2C Settings
+ */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# ifndef CONFIG_SYS_I2C_SPEED
+#  define CONFIG_SYS_I2C_SPEED 50000
+# endif
+# ifndef CONFIG_SYS_I2C_SLAVE
+#  define CONFIG_SYS_I2C_SLAVE 0
+# endif
+#endif
+
 /*
  * Misc Settings
  */
+#ifndef CONFIG_BOARD_SIZE_LIMIT
+# define CONFIG_BOARD_SIZE_LIMIT $$(( 256 * 1024 ))
+#endif
+#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 #define CONFIG_LZMA
+#define CONFIG_MONITOR_IS_IN_RAM
 
 #endif