X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf533-stamp.h;h=6e138b8620092de6f2d3f777b5076f1f0ca4df69;hb=35dd025c70fcc4389317db2f2a9d14795172137d;hp=76dd2fa4a26b67d92c80688799a27718ec72c1ad;hpb=fdeb932b1c8a3b615463995c3452d30ee0b12a33;p=oweals%2Fu-boot.git diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 76dd2fa4a2..6e138b8620 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -7,37 +7,17 @@ #include -#define CONFIG_STAMP 1 #define CONFIG_RTC_BFIN 1 -#define CONFIG_BF533 1 -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF533_BYPASS_BOOT -/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf533-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - -/* - * Stringize definitions - needed for environmental settings - */ -#define STRINGIZE2(x) #x -#define STRINGIZE(x) STRINGIZE2(x) - /* * Board settings */ @@ -45,7 +25,7 @@ #define CONFIG_SMC91111_BASE 0x20300300 /* FLASH/ETHERNET uses the same address range */ -#define SHARED_RESOURCES 1 +#define SHARED_RESOURCES 1 /* Is I2C bit-banged? */ #define CONFIG_SOFT_I2C 1 @@ -61,8 +41,6 @@ */ #define CONFIG_VIDEO 0 -#define CONFIG_VDSP 1 - /* * Clock settings */ @@ -88,10 +66,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif /* * Network settings @@ -119,25 +94,25 @@ */ #define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_FLASH_CFI_AMD_RESET #define CFG_FLASH_BASE 0x20000000 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20004000 -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_HEADER (CONFIG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#else +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0x20004000 +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_FLASH_BASE) #endif -#define CFG_ENV_SIZE 0x2000 -#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ #define ENV_IS_EMBEDDED #define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ @@ -148,7 +123,7 @@ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS 1 /* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 +#define CFG_JFFS2_FIRST_SECTOR 11 /* * following timeouts shall be used once the @@ -165,11 +140,7 @@ #define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC64M4A2FB_7E 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#endif #define CFG_SDRAM_BASE 0x00000000 @@ -177,7 +148,7 @@ #define CFG_MEMTEST_END (CFG_MAX_RAM_SIZE - 0x80000 - 1) #define CONFIG_LOADADDR 0x01000000 -#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_LOAD_ADDR CONFIG_LOADADDR #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_GBL_DATA_SIZE 0x4000 /* Reserve 16k for Global Data */ @@ -207,14 +178,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - /* * Command settings */ @@ -222,26 +185,18 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ -#endif /* configuration lookup from the BOOTP/DHCP server, */ /* but not try to load any image using TFTP */ #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_BOOTCOMMAND "run ramboot" -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_BOOTCOMMAND "eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000" -#endif #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#if (CONFIG_DRIVER_SMC91111) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ @@ -257,29 +212,6 @@ "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - " -#endif - -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ - "$(rootpath) console=ttyBF0,57600\0" \ - "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ - "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux; " \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux; " \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0"\ - "" -#endif #ifdef CONFIG_SOFT_I2C #if (!CONFIG_SOFT_I2C) @@ -316,9 +248,7 @@ #define CONFIG_CMD_I2C #endif -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_CMD_DHCP -#endif /* @@ -428,25 +358,16 @@ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif + +#define CONFIG_EBIU_SDRRC_VAL 0x268 +#define CONFIG_EBIU_SDGCTL_VAL 0x911109 +#define CONFIG_EBIU_SDBCTL_VAL 0x37 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3 +#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983 +#define CF_CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2 + +#include #endif