X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91-sama5_common.h;h=30c6cd47cac2ee1915756f16deea9d66a87628ed;hb=cd83bb371ff3a8a61eb3f65ded762da7daaa9b06;hp=051186d4bbb4e361c5fed438d29ee2ee21ceb970;hpb=067716bac59716b07f1ee70d9bf6e5528289bb45;p=oweals%2Fu-boot.git

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index 051186d4bb..30c6cd47ca 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -1,19 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common part of configuration settings for the AT91 SAMA5 board.
  *
  * Copyright (C) 2015 Atmel Corporation
  *		      Josh Wu <josh.wu@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __AT91_SAMA5_COMMON_H
 #define __AT91_SAMA5_COMMON_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
@@ -24,28 +19,22 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
 /* general purpose I/O */
+#ifndef CONFIG_DM_GPIO
 #define CONFIG_AT91_GPIO
+#endif
 
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 #ifdef CONFIG_ENV_IS_IN_MMC
 /* Use raw reserved sectors to save environment */
@@ -54,11 +43,6 @@
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #else
 /* u-boot env in sd/mmc card */
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define FAT_ENV_INTERFACE	"mmc"
-#define FAT_ENV_DEVICE_AND_PART	"0"
-#define FAT_ENV_FILE		"uboot.env"
 #define CONFIG_ENV_SIZE		0x4000
 #endif
 
@@ -68,29 +52,19 @@
 				"fatload mmc 0:1 0x21000000 ${dtb_name}; " \
 				"fatload mmc 0:1 0x22000000 zImage; "	\
 				"bootz 0x22000000 - 0x21000000"
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"root=/dev/mmcblk0p2 rw rootwait"
+
 #else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(env_redundent),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-
-#ifdef CONFIG_SYS_USE_NANDFLASH
+
+#ifdef CONFIG_NAND_BOOT
 /* u-boot env in nand flash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x140000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE			0x20000
 #define CONFIG_BOOTCOMMAND		"nand read 0x21000000 0x180000 0x80000;"	\
 					"nand read 0x22000000 0x200000 0x600000;"	\
 					"bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SYS_USE_SERIALFLASH
+#elif CONFIG_SPI_BOOT
 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		0x6000
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_SECT_SIZE		0x1000
@@ -102,14 +76,6 @@
 
 #endif
 
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)