X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Faria.h;h=c9f0076ee6a177f67f9e10ce0d5e64c7ac249ebe;hb=d9fdfe0aa598978054f108ba42ca928aceb8c090;hp=01e347e6900e4c339aa2d7a26974d70b544f085a;hpb=24956642ef7de5d8340683d721113f993ffaa0a8;p=oweals%2Fu-boot.git

diff --git a/include/configs/aria.h b/include/configs/aria.h
index 01e347e690..c9f0076ee6 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,8 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 #define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP	1	/* Don't include FSL DIU binary bmp */
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
 /* video */
 #undef CONFIG_VIDEO
@@ -246,13 +247,9 @@
  */
 #define CONFIG_CMD_NAND					/* enable NAND support */
 #define CONFIG_JFFS2_NAND				/* with JFFS2 on it */
-
-
 #define CONFIG_NAND_MPC5121_NFC
 #define CONFIG_SYS_NAND_BASE		0x40000000
-
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
 
 /*
  * Configuration parameters for MPC5121 NAND driver
@@ -298,14 +295,13 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE		CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(384 * 1024)
 
 #ifdef	CONFIG_FSL_DIU_FB
@@ -398,7 +394,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC		1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR			0x17
 #define CONFIG_MII			1	/* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT		1
@@ -506,10 +501,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE		32768
@@ -525,14 +520,6 @@
 
 #define CONFIG_HIGH_BATS		1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD			0x01
-#define BOOTFLAG_WARM			0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
@@ -545,8 +532,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME			aria
-#define CONFIG_BOOTFILE			aria/uImage
-#define CONFIG_ROOTPATH			/opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE			"aria/uImage"
+#define CONFIG_ROOTPATH			"/opt/eldk/ppc_6xx"
 
 #define CONFIG_LOADADDR			400000	/* default load addr */