X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fapalis-tk1.h;h=fe45917b885d9c1dba27237b2aee03774c1ea372;hb=bb1bb4bb5df9df4d3f07e39a632daaff79e4b77e;hp=10f2948c621f464bec902b3d80a37aa6d2f9e612;hpb=8c57395d494b1a6fbddddacbc402ee40703c89c6;p=oweals%2Fu-boot.git

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 10f2948c62..fe45917b88 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -18,6 +18,9 @@
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
+#define FDT_MODULE			"apalis-v1.2"
+#define FDT_MODULE_V1_0			"apalis"
+
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
@@ -58,7 +61,7 @@
 	"emmcbootpart=1\0" \
 	"emmcdev=0\0" \
 	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \
+		"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
 		"setenv dtbparam ${fdt_addr_r}\0" \
 	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
 	"emmcrootpart=2\0"
@@ -70,7 +73,7 @@
 		"run nfsdtbload; dhcp ${kernel_addr_r} " \
 		"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
+		"${soc}-${fdt_module}-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
@@ -85,28 +88,11 @@
 	"sdbootpart=1\0" \
 	"sddev=1\0" \
 	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
-		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
+		"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0" \
 	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
 	"sdrootpart=2\0"
 
-#define USB_BOOTCMD \
-	"set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \
-		"rootfstype=ext4 rootwait\0" \
-	"usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
-		"setenv bootargs ${defargs} ${setupargs} " \
-		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-		"run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
-		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
-	"usbbootpart=1\0" \
-	"usbdev=0\0" \
-	"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
-		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0" \
-	"usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
-	"usbrootpart=2\0"
-
 #define BOARD_EXTRA_ENV_SETTINGS \
 	"boot_file=zImage\0" \
 	"console=ttyS0\0" \
@@ -117,9 +103,9 @@
 	EMMC_BOOTCMD \
 	"fdt_board=eval\0" \
 	"fdt_fixup=;\0" \
+	"fdt_module=" FDT_MODULE "\0" \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
-	USB_BOOTCMD \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
@@ -136,8 +122,7 @@
 	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
-	USB_BOOTCMD \
-	"vidargs=video=tegrafb0:640x480-16@60 fbcon=map:1\0"
+	"vidargs=fbcon=map:1\0"
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
@@ -153,8 +138,6 @@
 
 #define CONFIG_CMD_TIME
 
-#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"