X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Famcc-common.h;h=23a859fcb402f9e8f4e173a768240e0259919b3c;hb=6050c754b0f06c7b2c867cb9fd279498bc89c393;hp=3b733c03eeba2184978988455d9da08a03deaba3;hpb=92afd368bba7d98b2b7bfb51082c3639bb2119b3;p=oweals%2Fu-boot.git

diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 3b733c03ee..23a859fcb4 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2008
+ * (C) Copyright 2008, 2009
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * Common configuration options for all AMCC boards
@@ -40,6 +40,7 @@
  * I2C
  */
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
@@ -137,10 +138,11 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the 40x Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(16 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN		(16 << 20) /* Increase max gunzip size */
 
 /*
  * Internal Definitions
@@ -155,6 +157,8 @@
  */
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
+/* Update size in "reg" property of NOR FLASH device tree nodes */
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
 /*
  * Booting and default environment
@@ -214,9 +218,9 @@
 		" console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0"	\
 	CONFIG_ADDMISC							\
 	"initrd_high=30000000\0"					\
-	"kernel_addr_r=400000\0"					\
-	"fdt_addr_r=800000\0"						\
-	"ramdisk_addr_r=C00000\0"					\
+	"kernel_addr_r=1000000\0"					\
+	"fdt_addr_r=1800000\0"						\
+	"ramdisk_addr_r=1900000\0"					\
 	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
 	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
 	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
@@ -270,17 +274,17 @@
 		"bootm ${kernel_addr_r}\0"
 
 #define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"	\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"load=tftp 200000 ${u-boot}\0"					\
 	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
 		"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"		\
-		"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
-		"setenv filesize;saveenv\0"				\
+		"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}" \
 	"upd=run load update\0"						\
 
 #define CONFIG_AMCC_DEF_ENV_NAND_UPD					\
-	"nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"	\
-	"nupdate=nand erase 0 100000;nand write 200000 0 100000;"	\
-		"setenv filesize;saveenv\0"				\
+	"u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"	\
+	"nload=tftp 200000 ${u-boot-nand}\0"				\
+	"nupdate=nand erase 0 100000;nand write 200000 0 100000"	\
 	"nupd=run nload nupdate\0"
 
 #endif /* __AMCC_COMMON_H */