X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fam3517_crane.h;h=ffe40a416065f21194f0b2d2b1503a50dbe902d6;hb=0cd07a90a9bc9acf6c07e5561441b212edbe901b;hp=77d9ba189962078371761968928a095fcf5d8000;hpb=2be296538e2e9d2893dc495b3fc8f9f6acb1454c;p=oweals%2Fu-boot.git

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 77d9ba1899..ffe40a4160 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
  *
@@ -6,8 +7,6 @@
  * Based on include/configs/am3517evm.h
  *
  * Copyright (C) 2011 Mistral Solutions pvt Ltd
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,7 +15,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
@@ -59,7 +57,6 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 on CRANEBOARD */
 
@@ -73,15 +70,12 @@
  * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
  * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  */
-#define CONFIG_USB_AM35X		1
-#define CONFIG_USB_MUSB_HCD			1
 
 #ifdef CONFIG_USB_AM35X
 
 #ifdef CONFIG_USB_MUSB_HCD
 
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
@@ -100,14 +94,7 @@
 
 #endif /* CONFIG_USB_AM35X */
 
-/* commands to include */
-
-#define CONFIG_CMD_NAND		/* NAND support			*/
-
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * Board NAND Info.
@@ -166,19 +153,12 @@
 		"fi; " \
 	"else run nandboot; fi"
 
-#define CONFIG_AUTO_COMPLETE	1
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		32	/* max number of command */
 						/* args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
@@ -217,12 +197,9 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_NAND_OMAP_GPMC
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB sector */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x260000
+#define CONFIG_ENV_ADDR			0x260000
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
@@ -247,8 +224,6 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
@@ -262,10 +237,8 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
@@ -286,7 +259,6 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000