X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fads5121.h;h=f516c4602c2c396e0cb1a0562b054cf451bdd9b8;hb=a55d074dac24dc941f1afb5b4e94b1509bfdda4e;hp=091da803a7823430423d655aa20b71faaa2d10b9;hpb=91eb5d663dd9e06e02557c039db30dd47065d9f0;p=oweals%2Fu-boot.git

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 091da803a7..f516c4602c 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -183,7 +183,7 @@
  */
 #undef CONFIG_BKUP_FLASH
 #define CFG_FLASH_CFI				/* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #ifdef CONFIG_BKUP_FLASH
 #define CFG_FLASH_BASE		0xFF800000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		0x00800000	/* max flash size in bytes */
@@ -210,6 +210,7 @@
 
 #define CFG_CS0_CFG		0x05059310	/* ALE active low, data size 4bytes */
 #define CFG_CS2_CFG		0x05059010	/* ALE active low, data size 1byte */
+#define CFG_CS_ALETIMING	0x00000005	/* Use alternative CS timing for CS0 and CS2 */
 
 /* Use SRAM for initial stack */
 #define CFG_INIT_RAM_ADDR	CFG_SRAM_BASE		/* Initial RAM address */
@@ -435,16 +436,18 @@
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"u-boot_addr_r=200000\0"					\
-	"kernel_addr_r=300000\0"					\
-	"fdt_addr_r=400000\0"						\
-	"ramdisk_addr_r=500000\0"					\
+	"kernel_addr_r=600000\0"					\
+	"fdt_addr_r=880000\0"						\
+	"ramdisk_addr_r=900000\0"					\
 	"u-boot_addr=FFF00000\0"					\
-	"kernel_addr=FC040000\0"					\
-	"fdt_addr=FC2C0000\0"						\
-	"ramdisk_addr=FC300000\0"					\
+	"kernel_addr=FFC40000\0"					\
+	"fdt_addr=FFEC0000\0"						\
+	"ramdisk_addr=FC040000\0"					\
 	"ramdiskfile=ads5121/uRamdisk\0"				\
-	"fdtfile=ads5121/ads5121.dtb\0"					\
 	"u-boot=ads5121/u-boot.bin\0"					\
+	"bootfile=ads5121/uImage\0"					\
+	"fdtfile=ads5121/ads5121.dtb\0"					\
+	"rootpath=/opt/eldk/ppc_6xx\n"					\
 	"netdev=eth0\0"							\
 	"consdev=ttyPSC0\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\