X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM834x.h;h=77d0bc304d20cf960118c0d8146de8cba4818292;hb=d4c746c7b1f802685f75fa531a88104b19861a8c;hp=90e8dd9dd9efa9dd27558c0f3bcfd3a896836328;hpb=3fc304b8d77ce6646d38ae506e9fae74b9975631;p=oweals%2Fu-boot.git

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 90e8dd9dd9..77d0bc304d 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -12,8 +12,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -43,7 +41,6 @@
 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 
 /* board pre init: do not call, nothing to do */
-#undef CONFIG_BOARD_EARLY_INIT_F
 
 /* detect the number of flash banks */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -187,13 +184,6 @@
 #define CONFIG_RTC_DS1337			/* use ds1337 rtc via i2c */
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68 */
 
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75			1	/* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS		{0}	/* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP		70
-#define CONFIG_SYS_DTT_LOW_TEMP		-30
-#define CONFIG_SYS_DTT_HYSTERESIS	3
-
 /*
  * TSEC
  */
@@ -223,15 +213,8 @@
 
 #endif	/* CONFIG_TSEC_ENET */
 
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_PCI
-
 #if defined(CONFIG_PCI)
 
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
 /* PCI1 host bridge */
@@ -263,7 +246,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		\
 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K (one sector) for env */
@@ -282,19 +264,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -304,18 +273,6 @@
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-				/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*
@@ -481,16 +438,10 @@
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		400000
 
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE		115200
-
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
-#undef	CONFIG_BOOTARGS
-
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=tqm834x\0"						\
@@ -538,7 +489,6 @@
  * JFFS2 partitions
  */
 /* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM834x-0"