X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FSCM.h;h=febfc39263a00fdbfc7ecd59b60750c08161fa21;hb=9939ffd5fbf1f5aff4d8172531d4fc33797c62c8;hp=91914e80defba9f9b227be1bacadc25cad6f43f9;hpb=d56019c0eed08632c2b1f828ca9e0b22d6151414;p=oweals%2Fu-boot.git

diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index 91914e80de..febfc39263 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -63,13 +63,13 @@
 
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
-#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
-	"bootp; " 								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"bootp; "								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
 	"bootm"
 
 /* enable I2C and select the hardware/software driver */
@@ -133,8 +133,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  *
  * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
  * X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -166,7 +165,7 @@
  * - Enable Full Duplex in FSMR
  */
 # define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE 	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -191,23 +190,33 @@
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_BSP)
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_BSP
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -353,7 +362,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif