X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FPPChameleonEVB.h;h=f9b20143a0051f207e8a83cd82793eeeb34994c5;hb=abaa5ba4e3b52f82b8158044cba6cf7986309d43;hp=8e9d92872a88f03ae5f545e275ec6c0807450594;hpb=4b142febff71eabdb7ddbb125c7b583b24ddc434;p=oweals%2Fu-boot.git

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 8e9d92872a..f9b20143a0 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -191,6 +191,12 @@
 #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD		691200
 
@@ -414,6 +420,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
@@ -541,13 +548,13 @@
  * GPIO0[30]	- EMAC0 input
  * GPIO0[31]	- EMAC1 reject packet as output
  */
-#define CONFIG_SYS_GPIO0_OSRH		0x40000550
-#define CONFIG_SYS_GPIO0_OSRL		0x00000110
-#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
-/*#define CONFIG_SYS_GPIO0_ISR1L	0x15555445*/
-#define CONFIG_SYS_GPIO0_ISR1L		0x15555444
-#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_OSRL		0x40000550
+#define CONFIG_SYS_GPIO0_OSRH		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1L		0x00000000
+/*#define CONFIG_SYS_GPIO0_ISR1H	0x15555445*/
+#define CONFIG_SYS_GPIO0_ISR1H		0x15555444
 #define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
 #define CONFIG_SYS_GPIO0_TCR		0xF7FF8014
 
 /*
@@ -576,17 +583,6 @@
 #define		DIMM_READ_ADDR 0xAB
 #define		DIMM_WRITE_ADDR 0xAA
 
-#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register		*/
-#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register	*/
-#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register		*/
-#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register	*/
-#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register		*/
-#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register		*/
-#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register		*/
-#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register			*/
-#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR				*/
-#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register		*/
-
 /* Defines for CPC0_PLLMR1 Register fields */
 #define PLL_ACTIVE		0x80000000
 #define CPC0_PLLMR1_SSCS	0x80000000