X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FPM828.h;h=f437d21c69b1128551d343f71e18485daf411c9f;hb=508eb85db7065e34948c189c83f7e348c1cfd61e;hp=37ee9771b52fa5c3b57ef27c2d7b98a765734b64;hpb=f6e5739a68131998a5ae8aa0cf56a0316f810200;p=oweals%2Fu-boot.git

diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 37ee9771b5..f437d21c69 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -43,7 +43,7 @@
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
-#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
@@ -103,8 +103,7 @@
  *   - CONFIG_NET_MULTI must be defined
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
 #define CONFIG_NET_MULTI
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
@@ -152,38 +151,39 @@
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
 
 #ifdef CONFIG_PCI
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SNTP	)
-#else	/* ! PCI */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
-#endif	/* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#endif
+
 
 /*
  * Disk-On-Chip configuration
  */
-#define CFG_NAND_LEGACY
+#define CONFIG_NAND_LEGACY
 
 #define CFG_DOC_SHORT_TIMEOUT
 #define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
@@ -196,7 +196,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -250,19 +250,19 @@
 
 #if 0
 /* Start port with environment in flash; switch to EEPROM later */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
+#define CONFIG_ENV_SIZE		0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
 #define CFG_I2C_EEPROM_ADDR	0x58
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		512
-#define CFG_ENV_SIZE		(2048 - 512)
+#define CONFIG_ENV_OFFSET		512
+#define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -338,7 +338,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif