X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FPIP405.h;h=713ea12ee56deeed42442020a21e372cb5b4245a;hb=a51425d2a4e51381423bff9329042e66fedb7cb6;hp=3e57c0b92fe6ed0a59a969176343d06440d21312;hpb=fd4e49c18901a50b1648235f26da1e8caa0f8764;p=oweals%2Fu-boot.git

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 3e57c0b92f..713ea12ee5 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -35,6 +35,9 @@
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_PIP405		1	/* ...on a PIP405 board		*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 /***********************************************************
  * Clock
  ***********************************************************/
@@ -76,7 +79,6 @@
 #define CONFIG_CMD_BSP
 
 #define	 CONFIG_SYS_HUSH_PARSER
-#define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
  * I2C Stuff:
  * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -110,6 +112,8 @@
 #define SPD_EEPROM_ADDRESS      0x50
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /**************************************************************
  * Environment definitions
  **************************************************************/
@@ -167,6 +171,12 @@
 #define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
 
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
 
@@ -221,11 +231,17 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_FLASH_SHOW_PROGRESS	45
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
 
 /*
  * Init Memory Controller:
@@ -249,20 +265,10 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
-#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE	/* Size of On Chip SRAM	       */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
@@ -278,7 +284,6 @@
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_NET_MULTI
 /************************************************************
  * RTC
  ***********************************************************/