X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FPCIPPC2.h;h=77cedc06d67690350e17b08d89f4f78124816e22;hb=c360033ffb3b15d64405c9a3aa5216fbf188ff0a;hp=5951d007d5151039ffb050e262b5a750d8cb50ef;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=oweals%2Fu-boot.git

diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 5951d007d5..77cedc06d6 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -43,6 +43,8 @@
 
 #define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xfff00000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1
 #define CONFIG_MISC_INIT_R	1
 
@@ -53,6 +55,10 @@
 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
 
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
 /*
  * BOOTP options
  */
@@ -75,7 +81,6 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
@@ -84,8 +89,6 @@
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
@@ -120,7 +123,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
 #define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
@@ -139,13 +142,9 @@
  * Definitions for initial stack pointer and data area
  */
 
-/* Size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE    128
-
 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -197,9 +196,8 @@
  * For the detail description refer to the PCIPPC2 user's manual.
  */
 #define CONFIG_SYS_HZ		      1000
-#define CONFIG_SYS_BUS_HZ            100000000 /* bus speed - 100 mhz          */
+#define CONFIG_SYS_BUS_CLK            100000000 /* bus speed - 100 mhz          */
 #define CONFIG_SYS_CPU_CLK	      300000000
-#define CONFIG_SYS_BUS_CLK	      100000000
 
 /*
  * For booting Linux, the board info and command line data
@@ -242,23 +240,6 @@
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-/*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
@@ -266,7 +247,6 @@
 
 #define CONFIG_WATCHDOG
 
-#define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */