X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FNETTA2.h;h=87000e6ddb0488d640625fd413d4fb5e27671a51;hb=aaa2a2fc9b81e0619da85244f5e9193a0a60003a;hp=a14b2dd8971612210c4f739966204a7ca91a1e5b;hpb=74de7aefd79690bae8cf5a5120f5962d444be089;p=oweals%2Fu-boot.git

diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index a14b2dd897..87000e6ddb 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -41,6 +41,8 @@
 #define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
 #define CONFIG_NETTA2		1	/* ...on a NetTA2 board		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -121,7 +123,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
@@ -480,14 +481,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
@@ -498,95 +491,9 @@
 #define DSP_BASE	0xF1000000
 #define NAND_BASE	0xF1010000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
-	} while(0)
-
-#if CONFIG_NETTA2_VERSION == 1
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#elif CONFIG_NETTA2_VERSION == 2
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/