X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8641HPCN.h;h=938874fe4240f7439dc00a6df025fb9be9a07c17;hb=e186851ae4f0a4c8b75108930b61a5f74baf6ed4;hp=8ed505076676b4b6fc07953b382ca2389f9fd432;hpb=cdb23792e864153b0c2b943bf011f10c7ba190e1;p=oweals%2Fu-boot.git

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 8ed5050766..938874fe42 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -10,14 +10,16 @@
  * MPC8641HPCN board configuration file
  *
  * Make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ * search for CONFIG_SERVERIP, etc. in this file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 /* High Level Configuration Options */
-#define CONFIG_MPC86xx		1	/* MPC86xx */
 #define CONFIG_MPC8641		1	/* MPC8641 specific */
 #define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_MP		1	/* support multiple processors */
@@ -108,7 +110,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * DDR Setup
  */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
@@ -253,7 +255,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	 /* Reserved for malloc */
 
 /* Serial Port */
@@ -600,7 +602,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #ifndef CONFIG_SYS_RAMBOOT
     #define CONFIG_ENV_IS_IN_FLASH	1
-    #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x60000)
+    #define CONFIG_ENV_ADDR		\
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
     #define CONFIG_ENV_SECT_SIZE		0x10000	/* 64K(one sector) for env */
 #else
     #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
@@ -670,21 +673,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-    #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
  * Environment Configuration
  */
 
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR	 00:E0:0C:00:00:01
-#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
-#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
-#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
-#endif
-
 #define CONFIG_HAS_ETH0		1
 #define CONFIG_HAS_ETH1		1
 #define CONFIG_HAS_ETH2		1