X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=7dc03771786c0a9065264b75aada0f6263d3d618;hb=9629ccdde79adb1e471cfb24d9fee9f5c6c94aa6;hp=719c27966a3642cc1272612e8ca8e05ea408f63d;hpb=a6d4cd4778bcc30f451f2d5d92ec4722ff5b71cc;p=oweals%2Fu-boot.git

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 719c27966a..7dc0377178 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -50,10 +49,6 @@
 #define CONFIG_MPC834x		/* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349		/* MPC8349 specific */
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFEF00000
-#endif
-
 #define CONFIG_SYS_IMMR	0xE0000000	/* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
@@ -67,13 +62,11 @@
 /* The CF card interface on the back of the board */
 #define CONFIG_COMPACT_FLASH
 #define CONFIG_VSC7385_ENET	/* VSC7385 ethernet support */
-#define CONFIG_SATA_SIL3114	/* SIL3114 SATA controller */
 #define CONFIG_SYS_USB_HOST	/* use the EHCI USB controller */
 #endif
 
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C
-#define CONFIG_TSEC_ENET		/* TSEC Ethernet support */
 
 /*
  * Device configurations
@@ -139,7 +132,6 @@
 #ifdef CONFIG_SATA_SIL3114
 
 #define CONFIG_SYS_SATA_MAX_DEVICE      4
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 
 #endif
@@ -148,7 +140,6 @@
 /*
  * Support USB
  */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 
 /* Current USB implementation supports the only USB controller,
@@ -347,7 +338,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -420,7 +410,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #ifdef CONFIG_TSEC_ENET
 
 #define CONFIG_MII
-#define CONFIG_PHY_GIGE		/* In case CONFIG_CMD_MII is specified */
 
 #define CONFIG_TSEC1
 
@@ -453,14 +442,12 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_ENV_OVERWRITE
 
 #ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_IS_IN_FLASH
   #define CONFIG_ENV_ADDR	\
 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
   #define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) for environment */
   #define CONFIG_ENV_SIZE	0x2000
 #else
   #undef  CONFIG_FLASH_CFI_DRIVER
-  #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
   #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - 0x1000)
   #define CONFIG_ENV_SIZE	0x2000
 #endif
@@ -472,35 +459,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SDRAM
-
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
-				|| defined(CONFIG_USB_STORAGE)
-	#define CONFIG_SUPPORT_VFAT
-#endif
-
-#ifdef CONFIG_COMPACT_FLASH
-	#define CONFIG_CMD_IDE
-#endif
-
-#ifdef CONFIG_SATA_SIL3114
-	#define CONFIG_CMD_SATA
-#endif
-
-#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
-#endif
-
-#ifdef CONFIG_PCI
-	#define CONFIG_CMD_PCI
-#endif
 
 /* Watchdog */
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
@@ -508,25 +466,10 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-				/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -704,12 +647,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #define CONFIG_NETDEV		"eth0"
 
-#ifdef CONFIG_MPC8349ITX
-#define CONFIG_HOSTNAME		"mpc8349emitx"
-#else
-#define CONFIG_HOSTNAME		"mpc8349emitxgp"
-#endif
-
 /* Default path and filenames */
 #define CONFIG_ROOTPATH		"/nfsroot/rootfs"
 #define CONFIG_BOOTFILE		"uImage"
@@ -723,16 +660,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #endif
 
 
-#define CONFIG_BOOTARGS \
-	"root=/dev/nfs rw" \
-	" nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH	\
-	" ip=" __stringify(CONFIG_IPADDR) ":"		\
-		__stringify(CONFIG_SERVERIP) ":"	\
-		__stringify(CONFIG_GATEWAYIP) ":"	\
-		__stringify(CONFIG_NETMASK) ":"		\
-		CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off"		\
-	" console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=" __stringify(CONSOLE) "\0"			\
 	"netdev=" CONFIG_NETDEV "\0"					\