X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8308RDB.h;h=7f2761c5391f2b72ab5d64930bb1d646dcb18664;hb=6342fa00b20fa01e93c8c6886376ea27ee9a7a73;hp=d919871ee3420bf39942f914fbc8ab991a937474;hpb=9f530d59e63f6a4584e0caee54f92255c7ed59ab;p=oweals%2Fu-boot.git diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index d919871ee3..7f2761c539 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -33,6 +33,8 @@ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_MISC_INIT_R /* @@ -85,10 +87,27 @@ /* * System IO Config */ -#define CONFIG_SYS_SICRH 0x01b7d103 -#define CONFIG_SYS_SICRL 0x00000040 /* 3.3V, no delay */ - -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_SYS_SICRH (\ + SICRH_ESDHC_A_SD |\ + SICRH_ESDHC_B_SD |\ + SICRH_ESDHC_C_SD |\ + SICRH_GPIO_A_TSEC2 |\ + SICRH_GPIO_B_TSEC2_GTX_CLK125 |\ + SICRH_IEEE1588_A_GPIO |\ + SICRH_USB |\ + SICRH_GTM_GPIO |\ + SICRH_IEEE1588_B_GPIO |\ + SICRH_ETSEC2_CRS |\ + SICRH_GPIOSEL_1 |\ + SICRH_TMROBI_V3P3 |\ + SICRH_TSOBI1_V2P5 |\ + SICRH_TSOBI2_V2P5) /* 0x01b7d103 */ +#define CONFIG_SYS_SICRL (\ + SICRL_SPI_PF0 |\ + SICRL_UART_PF0 |\ + SICRL_IRQ_PF0 |\ + SICRL_I2C2_PF0 |\ + SICRL_ETSEC1_GTX_CLK125) /* 0x00000040 */ /* * IMMR new address @@ -130,7 +149,8 @@ #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | 0x00010000 /* ODT_WR to CSn */ \ + | CSCONFIG_ODT_RD_NEVER \ + | CSCONFIG_ODT_WR_ONLY_CURRENT \ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) /* 0x80010102 */ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 @@ -165,7 +185,7 @@ /* 0x03600100 */ #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_32_BE) + | SDRAM_CFG_DBW_32) /* 0x43080000 */ #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ @@ -183,7 +203,7 @@ /* * The reserved memory */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ @@ -193,10 +213,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup @@ -218,21 +237,20 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) -#define CONFIG_SYS_BR0_PRELIM (\ - CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\ - (2 << BR_PS_SHIFT) /* 16 bit port size */ |\ - BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -244,33 +262,47 @@ /* * NAND Flash on the Local Bus */ -#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ -#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ - | (2< " /* Pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -305,7 +336,7 @@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {{0x51}} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} } /* Don't probe these addrs */ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 @@ -335,19 +366,8 @@ #define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 -/* - * Fake PCIE2 definitions: there is no PCIE2 on this board but the code - * in arch/powerpc/cpu/mpc83xx/pcie.c doesn't compile without this - */ -#define CONFIG_SYS_PCIE2_BASE 0xC0000000 -#define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 -#define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000 -#define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000 -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 +/* enable PCIE clock */ +#define CONFIG_SYS_SCCR_PCIEXP1CM 1 #define CONFIG_PCI #define CONFIG_PCIE @@ -360,7 +380,6 @@ /* * TSEC */ -#define CONFIG_NET_MULTI #define CONFIG_TSEC_ENET /* TSEC ethernet support */ #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) @@ -457,7 +476,7 @@ */ /* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ BATU_VS | BATU_VP) @@ -465,7 +484,7 @@ #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ BATU_VP) @@ -473,30 +492,22 @@ #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | \ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U /* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) #define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - /* * Environment Configuration */