X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FKUP4K.h;h=c0035e65deeb7e650a786693b9a98d6495c4d1b5;hb=bc9d5ef107b3feca44eacd18b321e8b4547462f9;hp=14d412d1832b6d1873ec074ee35d550ba0a15f7f;hpb=fe8d63c8c75acc87d398b2e181b9135d2ecfc05a;p=oweals%2Fu-boot.git

diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 14d412d183..c0035e65de 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -38,6 +38,8 @@
 #define CONFIG_MPC855		1	/* This is a MPC855 CPU		*/
 #define CONFIG_KUP4K		1	/* ...on a KUP4K module */
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -50,9 +52,9 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS						\
 "slot_a_boot=setenv bootargs root=/dev/sda2 ip=off;"				\
- "run addhw; mw.b 400000 00 80; diskboot 400000 0:1; bootm 400000\0"            \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 0:1; bootm 400000\0"		\
 "slot_b_boot=setenv bootargs root=/dev/sda2 ip=off;"				\
- "run addhw; mw.b 400000 00 80; diskboot 400000 2:1; bootm 400000\0"            \
+ "run addhw; mw.b 400000 00 80; diskboot 400000 2:1; bootm 400000\0"		\
 "nfs_boot=mw.b 400000 00 80; dhcp; run nfsargs addip addhw; bootm 400000\0"	\
 "fat_boot=mw.b 400000 00 80; fatload ide 2:1 400000 st.bin; run addhw;		\
  bootm 400000 \0"								\
@@ -105,7 +107,7 @@
  * enable I2C and select the hardware/software driver
  */
 #undef	CONFIG_HARD_I2C		/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         /* I2C bit-banged		*/
+#define	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
 
 #define CONFIG_SYS_I2C_SPEED	93000	/* 93 kHz is supposed to work */
 #define CONFIG_SYS_I2C_SLAVE	0xFE
@@ -137,9 +139,9 @@
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST	{CONFIG_SYS_I2C_PICIO_ADDR,	\
-			CONFIG_SYS_I2C_RTC_ADDR,	\
-			}
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_PICIO_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					}
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
@@ -209,9 +211,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -250,10 +251,10 @@
  * Dynamic MTD partition support
  */
 #define MTDPARTS_DEFAULT	"mtdparts=40000000.flash:256k(u-boot),"	\
-                                                "64k(env),"		\
-                                                "128k(splash),"		\
-                                                "512k(etc),"		\
-                                                "64k(hw-info)"
+						"64k(env),"		\
+						"128k(splash),"		\
+						"512k(etc),"		\
+						"64k(hw-info)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
@@ -495,19 +496,10 @@
 
 #define LATCH_ADDR 0x90000200
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 #define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot */
 #define CONFIG_AUTOBOOT_STOP_STR	"."
 #define CONFIG_SILENT_CONSOLE		1
-#define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device            */
+#define CONFIG_SYS_DEVICE_NULLDEV	1       /* enble null device		*/
 #define CONFIG_VERSION_VARIABLE		1
 
 /* pass open firmware flat tree */
@@ -515,4 +507,3 @@
 #define CONFIG_OF_BOARD_SETUP	1
 
 #endif	/* __CONFIG_H */
-