X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FKAREF.h;h=06fa676fd991252c82f425f87e67221de5482e88;hb=304e49e6cbec7ce8577a528e5be36930d098243b;hp=f936ae57dea764b5aae5354c4d05b83ead2745b0;hpb=550650ddd0fde00f245bc3da72d7272844198394;p=oweals%2Fu-boot.git

diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index f936ae57de..06fa676fd9 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -43,6 +43,9 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
 #define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 #undef	CONFIG_SYS_DRAM_TEST			     /* Disable-takes long time!*/
 #define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
@@ -77,12 +80,10 @@
 #define CONFIG_SYS_TEMP_STACK_OCM    1
 #define CONFIG_SYS_OCM_DATA_ADDR     CONFIG_SYS_ISRAM_BASE
 #define CONFIG_SYS_INIT_RAM_ADDR     CONFIG_SYS_ISRAM_BASE /* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END      0x2000	     /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+#define CONFIG_SYS_INIT_RAM_SIZE      0x2000	     /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
@@ -95,7 +96,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
@@ -164,7 +164,6 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
-#define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
 #define CONFIG_PHY1_ADDR      0xff	     /* no phy on EMAC1		*/
 #define CONFIG_PHY2_ADDR      0x08	     /* PHY addr, MGMT, EMAC2	*/
@@ -288,14 +287,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
 #define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/