X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FEB%2BMCF-EV123.h;h=876ec20ad15a887afd6af162e06f6c40743a417f;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=a8697ec88de877e1e7a0010aa45e00c1acf4e664;hpb=d1bc6c8d5f4a9c7ca9fb2292d5c65f846dcc3995;p=oweals%2Fu-boot.git diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a8697ec88d..876ec20ad1 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -27,9 +27,7 @@ #define CONFIG_EB_MCF_EV123 -#undef DEBUG -#undef CFG_HALT_BEFOR_RAM_JUMP -#undef ET_DEBUG +#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP /* * High Level Configuration Options (easy to change) @@ -40,11 +38,10 @@ #define CONFIG_MISC_INIT_R -#define FEC_ENET -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 - +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 9600 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ @@ -54,18 +51,18 @@ * Environment is embedded in u-boot in the second sector of the flash */ #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CFG_ENV_ADDR 0xF003C000 /* End of 256K */ -#define CFG_ENV_SECT_SIZE 0x4000 -#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */ +#define CONFIG_ENV_SECT_SIZE 0x4000 +#define CONFIG_ENV_IS_IN_FLASH 1 /* -#define CFG_ENV_IS_EMBEDDED 1 -#define CFG_ENV_ADDR_REDUND 0xF0018000 -#define CFG_ENV_SECT_SIZE_REDUND 0x4000 +#define CONFIG_ENV_IS_EMBEDDED 1 +#define CONFIG_ENV_ADDR_REDUND 0xF0018000 +#define CONFIG_ENV_SECT_SIZE_REDUND 0x4000 */ #else -#define CFG_ENV_ADDR 0xFFE04000 -#define CFG_ENV_SECT_SIZE 0x2000 -#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0xFFE04000 +#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_IS_IN_FLASH 1 #endif @@ -84,151 +81,184 @@ #include #undef CONFIG_CMD_LOADB +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFTMR + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1 +# define CONFIG_SYS_DISCOVER_PHY +# define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +# define CONFIG_SYS_FEC0_PINMUX 0 +# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CONFIG_SYS_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:CF:52:82:EB:01 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ #define CONFIG_BOOTDELAY 5 -#define CFG_PROMPT "\nEV123 U-Boot> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x20000 +#define CONFIG_SYS_LOAD_ADDR 0x20000 -#define CFG_MEMTEST_START 0x100000 -#define CFG_MEMTEST_END 0x400000 -/*#define CFG_DRAM_TEST 1 */ -#undef CFG_DRAM_TEST +#define CONFIG_SYS_MEMTEST_START 0x100000 +#define CONFIG_SYS_MEMTEST_END 0x400000 +/*#define CONFIG_SYS_DRAM_TEST 1 */ +#undef CONFIG_SYS_DRAM_TEST /* Clock and PLL Configuration */ -#define CFG_HZ 10000000 -#define CFG_CLK 58982400 /* 9,8304MHz * 6 */ +#define CONFIG_SYS_HZ 10000000 +#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */ /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ -#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */ -#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CFG_MBAR 0x40000000 - -#define CFG_DISCOVER_PHY -/* #define CFG_ENET_BD_BASE 0x380000 */ +#define CONFIG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE1 0x00000000 -#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_BASE1 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */ /* -#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024 -#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_BASE0 CONFIG_SYS_SDRAM_BASE1+CONFIG_SYS_SDRAM_SIZE1*1024*1024 +#define CONFIG_SYS_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ -#define CFG_SDRAM_BASE CFG_SDRAM_BASE1 -#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1 +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1 -#define CFG_FLASH_BASE 0xFFE00000 -#define CFG_INT_FLASH_BASE 0xF0000000 +#define CONFIG_SYS_FLASH_BASE 0xFFE00000 +#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 +#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -#if (TEXT_BASE != CFG_INT_FLASH_BASE) -#define CFG_MONITOR_BASE (TEXT_BASE + 0x400) +#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) #else -#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ #endif -#define CFG_MONITOR_LEN 0x20000 -#define CFG_MALLOC_LEN (256 << 10) -#define CFG_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MONITOR_LEN 0x20000 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_SECT 35 -#define CFG_MAX_FLASH_BANKS 2 -#define CFG_FLASH_ERASE_TOUT 10000000 -#define CFG_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_SECT 35 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 +#define CONFIG_SYS_FLASH_PROTECTION /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CFG_CS0_BASE CFG_FLASH_BASE -#define CFG_CS0_SIZE 2*1024*1024 -#define CFG_CS0_WIDTH 16 -#define CFG_CS0_RO 0 -#define CFG_CS0_WS 6 +#define CONFIG_SYS_CS0_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE 2*1024*1024 +#define CONFIG_SYS_CS0_WIDTH 16 +#define CONFIG_SYS_CS0_RO 0 +#define CONFIG_SYS_CS0_WS 6 -#define CFG_CS3_BASE 0xE0000000 -#define CFG_CS3_SIZE 1*1024*1024 -#define CFG_CS3_WIDTH 16 -#define CFG_CS3_RO 0 -#define CFG_CS3_WS 6 +#define CONFIG_SYS_CS3_BASE 0xE0000000 +#define CONFIG_SYS_CS3_SIZE 1*1024*1024 +#define CONFIG_SYS_CS3_WIDTH 16 +#define CONFIG_SYS_CS3_RO 0 +#define CONFIG_SYS_CS3_WS 6 /*----------------------------------------------------------------------- * Port configuration */ -#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ -#define CFG_PADDR 0x0000000 -#define CFG_PADAT 0x0000000 +#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CONFIG_SYS_PADDR 0x0000000 +#define CONFIG_SYS_PADAT 0x0000000 -#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CFG_PBDDR 0x0000000 -#define CFG_PBDAT 0x0000000 +#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CONFIG_SYS_PBDDR 0x0000000 +#define CONFIG_SYS_PBDAT 0x0000000 -#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ -#define CFG_PCDDR 0x0000000 -#define CFG_PCDAT 0x0000000 +#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 -#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CFG_PCDDR 0x0000000 -#define CFG_PCDAT 0x0000000 +#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 -#define CFG_PEHLPAR 0xC0 -#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ -#define CFG_DDRUA 0x05 -#define CFG_PJPAR 0xFF; +#define CONFIG_SYS_PEHLPAR 0xC0 +#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CONFIG_SYS_DDRUA 0x05 +#define CONFIG_SYS_PJPAR 0xFF /*----------------------------------------------------------------------- * CCM configuration */ -#define CFG_CCM_SIZ 0 +#define CONFIG_SYS_CCM_SIZ 0 /*---------------------------------------------------------------------*/ #endif /* _CONFIG_M5282EVB_H */