X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FDU440.h;h=e6e2b300caaef922954efa233c0b848a14e649ef;hb=083d506937002f2795c80fe0c3ae194ad2c3d085;hp=830466f7a8dfd42a7901863bed915e19794f6b5b;hpb=92abce8731750e92d9b5adf2e506fdb50eff59bc;p=oweals%2Fu-boot.git

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 830466f7a8..e6e2b300ca 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -37,6 +37,10 @@
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_SYS_CLK_FREQ	33333400	/* external freq to pll	*/
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFFFA0000
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
 #define CONFIG_LAST_STAGE_INIT  1               /* last_stage_init      */
@@ -51,7 +55,7 @@
 #define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
 #define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
 #define CONFIG_SYS_FLASH_BASE		0xfc000000	/* start of FLASH	*/
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND0_ADDR		0xd0000000      /* NAND Flash		*/
 #define CONFIG_SYS_NAND1_ADDR		0xd0100000      /* NAND Flash		*/
 #define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
@@ -64,9 +68,6 @@
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID	PCI_VENDOR_ID_ESDGMBH
 #define CONFIG_SYS_PCI_SUBSYS_ID	0x0444		/* device ID for DU440 */
 
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
-
 #define CONFIG_SYS_USB2D0_BASE		0xe0000100
 #define CONFIG_SYS_USB_DEVICE		0xe0000000
 #define CONFIG_SYS_USB_HOST		0xe0000400
@@ -86,10 +87,14 @@
 /*
  * Serial Port
  */
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
-#undef CONFIG_UART1_CONSOLE
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -416,14 +421,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
 				 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */